I have 3 27" 5k monitors in portrait and a 32" 4k horizontal above those. It is all mounted with vesa cheeseplates to manfrotto magic arms on t slot aluminum attached to a C stand with manfrotto super clamps. I also have two genelec studio monitors which sound amazing.
The brand names are there, I assume, to show that it's not some cheapskate setup jerry-rigged from salvaged parts. Because even then it's still less expensive that the giant Dell monitor.
I frankly don't understand the point of such monitors. If they are placed reasonably near, they don't fit human FOV well, and the periphery is seen distorted. If they are far enough away, the pixel pitch goes well past the angular resolution of the eye.
I got the 49" version of the dell Alienware display (basically this one size down with different branding and stand)...
. From my perspective you're looking at it incorrectly, the point isn't to be able to look at everything at the same time, it's to be able to quickly glance from the one side to another.
Let's say I have an ide open, I will likely not look at the directory structure often, but I want an easy way to switch files - fantastic for having it available just by glancing over
Now you run tests, start the application etc. It also doesn't need to be in your view, all the time - but isn't it convenient to be able to just look where you know it's?
It's suboptimal for competitive gaming however, exactly for the reason you said. Scenic gaming on the other hand is improved by it, because the larger screen is more innersive
I used to be happy with virtual desktops. Then I switched to macOS. What a mess it is: from the irritating virtual desktop animations that delay you, to the annoying keyboard shortcuts that don’t work in full screen mode, I’ve decided to just move on to multiple monitors or maybe one big display.
If your plan is to physically move your head to look at the peripheral anyway, then this is much cheaper to achieve by putting a second monitor alongside your primary monitor (I keep an older 2560x1440 in portrait alongside my main 4k display)
Scenic gaming seems pretty niche outside of dedicated flight/driving sim setups? And regular gaming often kind of sucks on ultrawides - way too few games have decent options to pull the HUD into the center region of the display
Force of habit. The film industry values brand recognition of gear highly because reliability is important. There are a lot of cheaper equivalent parts which could be assumed which wouldnt accurately illustrate my point. I spent around $450 just on the hardware to mount the monitors and it is still cheaper than this dell monitor.
“We're consumers. We are by-products of a lifestyle obsession. Murder, crime, poverty, these things don't concern me. What concerns me are celebrity magazines, television with 500 channels, some guy's name on my underwear.”
I get bonkers annoyed using just two monitors with macos or windows. multi monitor management... nothing behaves how i want it to, apps never open where they should etc etc. I havent tried it on desktop linux enough to know if it's any better - maybe at least id assume have the most configuration control on linux.
How do you do it? I always give up in frustration.
100% would keep the genelecs :)
I can only speak for the Cinnamon desktop environment on Linux Mint, but it’s very simple:
- Apps always launch on the monitor your mouse cursor is on
- Switching the focused window to the other monitor is Win+Shift+Arrow Keys
So if I clicked to open an app, it’s on the monitor I’m already looking at. If I used a keyboard shortcut, win+shift+arrow is super easy and simple.
The fact that it’s a stupid simple rule means I can get way better at just doing things by muscle memory… I don’t have to worry about being outsmarted by the window manager.
I use AeroSpace on mac os for tiling window management with spaces mapped per monitor so that eg space 1 is my top monitor woth my email and chat and space e is on the left for my obsidian, spaces asdfgh are my center monitor for code and terminals, and spaces zxcvb are the right monitor for browsers. I dont stick to this organization rigidly and when I'm doing odd tasks like cad or developing an app I break the patterns and put things on whatever monitor is convenient. I try to stick to a few common apps in the same spaces however.
On KDE and things like opening app on active monitor / desktop work fine. Only complaint is that on older versions, the taskbar on secondary monitors would sometimes disappear.
For reference I have 3 monitors (2x 4k, 1x 1080p) and am currently using Debian / Wayland and Ubuntu / X11.
It was a bug. I have 3 screens, and it would disappear on the third. An update, sometime around middle of last year fixed it, if my memory is correct.
But, I still have occasional problems with my monitors not waking up when I return to my desk. With 3, I've never had all 3 fail to wake, and a simple disable in the monitor settings, then choose "revert" usually brings them back.
For Mac I spent $0.99 a long time ago and bought Magnet on the App Store which lets me move windows and resize using hotkeys. For windows I aggressively use windows key + left/right to move the windows around, with 4 displays you just have to remember their ordering and eventually it becomes muscle memory to get it to snap where you want it. It mostly moves left to right, in my case.
What fixed it for my was switching to Omarchy and using wayland (what it comes with). I don't bother very much with positioning or window resizing anymore. Give it a shot!
The relative distance of the top 4k monitor actually makes it work pretty well. I use that for chats and email and dashboards that I need to keep an eye on.
Haha thats amazingly confusing when you look closely.
I'm using baby pin reciever plates on 4080 extrusion with m6 thumbscrews into drop in t nuts. There is only one c stand. The extrusion is actually two parts in a cross. The speakers are on the horizontal extrusion mounted on magic arms. My momitors are angled slightly upward and the bottom is a few inches lower than standard desk height.
Two PA27JCV and one LG ultrasharp (it was cheap because it was broken and I repaired it) and the 4k monitor is a samsung which I cant recommend. (Open box was cheap though)
They are the tiny 8010s. I don't produce much with this setup so accurate near field monitoring was all that I needed. I love how crystal clear the high end is with these. I bought them used and they were pretty beat up. I take them traveling so as an anti theft measure I painted them neon green and covered them in stickers to make them look cheap. They are mounted on magic arms to the aluminum extrusion. I also have some random Klipsch subwoofer. I send them a balanced output from a yamaha mixer at 192khz.
Why? Just out of curiosity. Is it that you don’t need that much low end for the media you’re usually playing through your monitors or do the 8030Cs have enough low end to eliminate the need for a separate woofer?
I’ve been debating getting genelecs for a few years now but the price jump from something like JBLs or Yamahas is so huge that I can’t justify it. At least not on my current budget.
I currently have the 8020D + 7040A. It's pretty much perfect sound with room correction applied, but the 7040A is kind of big and ugly. I'd be willing to give up some low-end to simplify the setup. Also the sub performs the crossover, so it's a lot of cords: 2 cords for DAC -> Sub, and 2 cords for sub -> L/R. And these cords have to be really long for when I raise my desk because the sub has to go on the floor.
Also have 2 8020D's but I skimped on the subwoofer. Probably a bad idea, since they deemphasize the lows so much, but surprisingly I can crank up them up on my mixer's EQ to make up for it without losing clarity.
Interesting, manfrotto's website has a cookie notice with two buttons: ALLOW ALL and ALLOW SELECTION.
However, there's no selections -- there's only a description of hundreds of cookies they store (e.g. 73 in Marketing section), but there's nothing to select, it's only text.
There seems to be grey deny button at top-right on first view but it disappears if you select the details. You need hide the details first if you want to click it.
I was going to comment about the price, but you kind of wrapped it up.
It's like the most popular form of innovation nowadays is just marginally nicer products with a massive premium on them - and I don't get how this is sustainable. Or maybe there's just way more people with massive amounts of disposable income than I realize...
There's no breakthrough of like "here's an amazing product, and by the way, it's for everyone".
This whole culture of scarcity, scalping, hoarding, FOMO, premium, it's so played out I'm literally done with it. This is paired with terrible customer support that takes customers for granted.
Very few companies seem to value their customers, and don't want to squeeze them. Tech, cars, consoles... You name it.
So this is my current stance: I'm out of the market for the foreseeable future, unless something breaks and I need to replace it. Even the "nice to have" stuff is down to almost zero.
Not for nothing but 6K HDR @ 120Hz is likely a large part of the cost of this monitor.
I don't know if I'd put it on my desk, I got somewhat used to my setup - I had 2x4K 27" 144Hz monitors with very thin bezels (LG or Asus?) that I then traded in when I got a ProDisplay XDR. I do wish for higher refresh, and maybe more screen size.
This monitor is not aimed at the same market segment as the pro display xdr which values high brightness, accurate color, and higher than normal contrast for hdr content mastering. In my opinion for productivity there are much cheaper setups which provide more ppi and more pixels per dollar.
I literally have this monitor already and these pixels are humongous. Even at 3 feet away. Also the viewing angle degradation is too much, so much so that it irritates to look at the edge of the screen from the center. A very poor monitor indeed.
I have the Apple 6K 32” Pro Display XDR and a Kuycon 5K 27”. Both are great. Apple was $6,500 and the Chinese version was $400 on EBay plus the $100 stand. Kuycon has more types of input, and a remote. Frame and display quality are on par for a dev.
They aren't even close in comparison? Like 600 nits brightness vs 1000 (1600 peak) for one. Contrast ratios are very very different. It only supports HDR600. They are very different displays in person. Perhaps at low brightness on text they are similar, but outside of that they really aren't very similar.
Amazing, checked just now and seems that these are now in stock in many places. When I checked last week, they weren't, seems like some stock got released for EU then.
What is going on here? Why is everyone in this thread using 'pixels" to mean ppi? It seems unnecessarily confusing or even misleading. I mean blatantly a 6K monitor has more pixels than a 5K or 4K one, regardless of the pixel density.
Yes really. A pixel is a pixel. This dell monitor has pixels the size of boulders. Apple Pro Display XDR has 4.6m more pixels in a significantly smaller area creating a much denser display.
macOS can specify regions of the screen to be 1x. If I'm using Capture One or Lightroom, my photos are at normal resolution while the UI elements are "retina/2x".
You can configure macOS to scale everything more or less, just like you want it.
Same for Windows and Linux.
And you keep the crispness of the full pixel resolution for text and images.
I've got an eye on the CES Samsung Odyssey offerings at 32" 6k 165hz. I'd prefer 16:10 and currently run two 16:10 30" displays, but nobody making them.
Is there a significant benefit for programming in going from 4K to 6K on a 32" display? I'm currently on 27" 1440p and looking for more screen estate for my neovim setup.
I'm in Norway, and I wonder if I see different prices than people from elsewhere in the world? Here it says $1.7K, and I can get the LG UltraFine 6K 32" for $2K, with the benefit of being bought from a Norwegian retailer (think guarantees and shopping security).
To be clear; I have never tried either of these monitors, so I can't tell if either is any good. :D
On the official Kuycon site, it says "Since 2023, Kuycon has partnered exclusively with ClickClack.io to bring its innovative line of monitors to customers outside of China[...]". I'm seriously considering getting one of these.
Those look like the monitors used on the F1 movie, which is strange, considering it was an Apple production and they maybe should have used apple monitors for product placement . I guess it is a testimony about Kuycon from Apple.
You should look at pictures of Apple's Pro Display XDR. The Kuycon monitor is an obvious rip-off of that in terms of styling, especially the ventilation on the back.
There's an awkward zone where scaling doesn't work well. But if you have a screen that can do nice high levels of detail, then you can run older UIs at exactly 2x and they will look just as good as they ever did. An Apple Pro display is a good fit here, offering 218 pixels per inch compared to a "traditional" 96.
By having fewer pixels, lower quality screens? Crazy what you can do when you cut corners.
This screen reminds of when I did tech support in high school and I helped a guy who bragged about his computer monitor, it was a TV running at 720p (if not lower) and a massive screen. The windows start bar was hilariously large (as were all UI elements), I had to just smile and nod until I got out of there.
Sure, your screen may be bigger but it's blurry and everything is scaled way too large.
The HiDPI/Retina bullshit is just bullshit. I've been running a 4K 43" 4:3 display at 100% scaling since 2018. It is neither blurry nor scaled too large. It can, however, comfortably fit 10 A4 pages simultaneously. Or 4 terminals + a browser + a PDF reader.
My arithmetic nodule is having a konniption fit. Does not compute. If this is 16:9 and you mistook your aspect ratio I can breathe again. √2:1 says 1.41:1 isn't 1.33:1
10 A4 pages do not fill a 4:3 or 3:4 aspect ratio box. They don't fill a 16:9 box either but it's more plausible, the wastage is different.
1. I don't think I'll ever buy Dell again. My current monitor is a Dell S3221QS 32" screen and it has vertical lines and starts flickering on both the Macbook M1 and the Mac Studio with the M4 Max chip after some time, which is a known issue[0][1]. It also defaults to YPbPr colors rather than RGB/SRGB, so the colors look off. I'm using HDMI to HDMI connectivity currently.
Part of it is also my fault as I thought a monitor would work with any computer.
2. That aside, what are you all using for window management on these large screens? I'm currently using Rectangle on Mac, but I was wondering if there's a better way.
I've gone the other direction - and after having struggled with other various monitors (the worst is easily the SAMSUNG 49" Odyssey Neo G9 G95NA - both cruddy capability (should have noted before buying it has no Power Delivery) as well as easily some of the blurriest text ever) - I've decided I will only ever buy Dell Monitors. Every one I've purchased (5 of them) in the last 15sh years has been a flawless performer - no hardware failures either.
Every monitor on every desk at work (around 3000 desks) is a Dell U3821DW - no broadscale systemic complaints that I've ever heard of.
I'm currently using my 4K 27" Dell P2715Q that I bought for $400 back in December 2017, and I've carried (physically) with me from office to office from Michigan to the Bay Area - thing runs for 10+ hours a day (minus weekend) for 8 years running. Eventually it's going to have to give in- and when it does - definitely going to buy another Dell (probably the U2725QE 27" 4K)
I'm kinda the same. I have a Dell monitor and a Gigabyte monitor side by side and my mac constantly loses the connection to the gigabyte monitor. At least once per day I have to unplug my video link to the gigabyte monitor to get the mac to rediscover it, this never happens with the dell one.
Counter-anecdata: I have 2 Dell U2720Q (Ultrasharp 27") bought in 2021 and they've been great.
That said, I've always stuck for Dell's upper-range Ultrasharp (U prefix in models) monitors, being slightly wary of their cheaper series which the S in your S3221QS implies.
I'm using 2x Dell U3011s, one I purchased around ~2013 probably and the other I got used recently for $100. My only issue with them is that they have PWM coil whine that only goes away if I crank the brightness to ~90%, which seems to produce an immense amount of heat and probably power consumption. I'd love to find a viable alternative solution for this, because these are my favorite monitors for now.
The model appears to have been released 16 years ago.
I haven't yet found a monitor that makes sense to replace them with either.
I think there is a slightly newer version of these, but I have the same set up.
I haven’t been able to find anything that has the vertical space that these monitors do. Even Ultra Wide monitors just aren’t tall enough. If I got this 52 inch behemoth that would help, but I would actually lose horizontal space.
Have you tried disabling GPU temporal dithering via BetterDisplay or StillColor? I had a similar problem with a different brand of monitor, and this has been the only reliable fix.
I bought a brand new Dell monitor through Amazon’s Dell Store (i.e. fulfilled by Dell themselves and shipped to me directly from their warehouse). The HDMI port broke a couple months later as it was sitting undisturbed on a desk, which was a common problem mentioned in its reviews. Dell flat out refused to replace it, saying that their database showed a different owner than me. Remember, they themselves shipped it straight to me. Amazon did right and let me return it even though it was already past the return period.
I will never, ever buy Dell hardware again. They’re dead to me. And when the IT department at a previous job reported to me, and a Dell rep cold called me to offer us a business plan, I politely explained why I’d rather gargle broken glass than risk my reputation on a vendor who doesn’t understand what a warranty means. That felt pretty good.
One of my Dell's would randomly decide that the mini DP connection has no signal, and rebooting the MacBook Pro was the only way to restore it. HDMI would work just fine.
I just setup mine today, and I am not sure I recommend it.
I went from a 40" to a 52", and I'm just moving my head waaay too much and my shoulders hurt. It is curved, but very little imo, it's almost like it's flat. I'm going to try it for a week before making the call on whether to return it.
I feel like this needs a workflow where you do work in the middle and use the fringes for other applications that you rarely look at. Otherwise you're moving your head waaay too much and squinting a bunch.
Based on personal experience, I think the upper bound for comfortably useful size at normal sitting distances is probably about 32", and even then I think there'd be better returns on adding vertical pixels to a ~27" monitor. A modern equivalent to the old 16:10 30" 2560x1600 monitors (ideally 2x scaling 5120x3200) would be great for example, but one could also imagine a 4:3 or 5:4 monitor with the same width (~23.5") as current 16:9 27" monitors.
I'm still rocking a couple of 30 inch dell 2560x1600 monitors. They're about the perfect size and not dealing with scaling in Linux is nice. I'd pay a ton of money for a modern equivalent.
Same! My employer offered a choice of 32-inch and 40-inch monitors. I “upgraded” from 32 to 40 but I regretted it. I just don’t make use of the extra horizontal space effectively.
That was my issue with multiple monitors years ago - I'd be cranking my neck over too often (looking at logs, etc). I vastly prefer an ultrawide where I can put logs / monitors on the side flexibly.
I have a 34 inch now, and feel like I could use more space - but it's nice to know there's an upper bound. Do you feel like there's still room to go beyond 40, or is that the sweet spot?
3x27” high-PPI displays in portrait orientation is the winner and no one does it
The center display is always actually centered. The short edge of a high-PPI 27” screen is wide enough for actual normal width browser or IDE usage, but now you get much more vertical real estate on that window.
Not nearly as much neck movement as an ultra wide and since the entire array is pretty square, the neck movement is way more balanced.
I went from 34"(3440x1440) which felt a little bit small to 38"(3840x1600) and it is nearly perfect. I can have my main window in the middle and 2 or 4 smaller windows (logs, chat, youtube, etc) on the side.
The only thing I want now is double pixel density.
When I owned a 40" monitor, I had to get a deeper desk and sit pretty far from it. Even then, I couldn't game on it, because games shove the HUD and minimal into the corners, and they were too far to the side to keep an eye on.
Can't picture a 52" being usable as a PC monitor, really.
I've been using a 49" monitor for almost four years.
I have the center window taking half of the screen, and on the sides I have my email, messaging clients and other things I like to monitor from time to time.
Kinda like this: [ | | ]
I am on mac and I use an app called Magnet to manage the windows. I will only change this setup for a larger monitor.
Seconding this. I have one for my work desk, where (surprisingly enough) it made a lot of sense. The DPI isn't as big of an issue as people make it out to be if your workflow doesn't depend on high density, but the curvature definitely could benefit from being a bit tighter. You need a fairly deep desk or a keyboard tray if you don't want to be turning your head a bunch.
That being said, having this in combination with PowerToys FancyZones has been fantastic. At any given time, I'm usually running 1-4 main working windows plus Signal, Outlook, and an RSS reader. This gives me more than enough real estate to keep them all available at a moment's notice. I have roughly 40% of the screen real estate dedicated to Signal, Outlook, and my RSS client, with the interior 60% being hotkey-mapped to divide in different proportions. Compared to my old setup (one ultrawide plus two verticals) it's been awesome.
You'll get used to it. I have 3 24 inch monitors side by side. Center one is usually the editor, right one documentation or more editors, left one browsers with info.
Yeah, I'm on a Lenovo 5k2k 40" UW and it's never occurred to me to want something wider. Though I will admit I definitely noticed the loss of total real estate vs my old 3x 27" setup.
Maybe it's a head turner vs eye mover thing. It's a lot less fatiguing moving eyes, which might not be option for glass wearers. I sit 2 feet away from my 50 inch OLED and moving eyes is much less work than windows management. Otherwise it is very workflow dependant, i.e. working on visuals or schematic diagrams.
I sometimes think that my 40" is too much because the extra space just ends up hosting distracting junk like Slack.
I also have a mild take that large screens make screen real estate cheap so less thought goes into user interface design. There's plenty of room just stick the widget anywhere!
It'd be pretty interesting to compare how much the amount of information one can cram onto their ~27" screen has changed between 2005 and 2025, with the comparison points between between a Mac running OS X 10.6 and a Mac running macOS 26, which I think is a particularly salient and apples-to-apples comparison since Apple was selling 30" 2560x1600 displays back then, which are close cousins to modern 27" 2560x1440 displays.
My gut feeling is that the difference would be around 30-40%. Information density of the UI of OS X 10.6 and contemporary software was much higher than today's tabletized "bouncy castle" style UI.
It would be interesting but I don't think that information density necessarily makes a good interface.
As a personal pet peeve example, developers love to cram a search bar (or browser tabs) into the top of the window. It's more dense but it's also harder to use and drag the window.
True. More accurately, it's a combination of high density, judicial allocation of whitespace, and layouts that have been thought through. The 2000s versions of OS X were better in those regards too, though.
I purchased this as soon as it was announced, I was surprised they had it ready to ship on the day of the CES announcement.
I do enjoy it, with Fancyzones, I can set up Unreal Engine Editor, Rider, discord/teams and a small corner window for searching and/or youtube watching on the side. At first I thought the pixel count was going to be too low but from my position it 'feels' retina at 125% windows scaling. Yes you can do the same with multiple monitors but I don't get the fatigue of turning my physical head, it's the perfect size to sit in middle and use your eyes to adjust/focus if that makes sense..
120hz and fast motion helps a lot. DCS World looks amazing on this, it feels like it's your full fov when playing games. Granted this isn't an OLED panel, I wouldn't play anything competitive on here but EU V and/or RTS games are very nice at 6k/52.
This replaced my dual 4K 120hz monitors. Recommend if you're not gaming.
I refuse to buy a dell monitor again because I found their quality low and their warranty process onerous. Took hours of my time to get a replacement sent and it had I failed in a different way soon after.
For a cheap throwaway monitor maybe. For anything premium no way.
I've found ideal monitor size and resolution depends greatly on viewing distance and relative position. I use a 38" ultra-wide and it's almost too wide - but I have it 'floating' on an adjustable monitor arm so it's only about 24" from my eyes and a bit higher than most monitor stands would allow. The monitor arm is key because once I put a full ergo split keyboard at a comfortable arm-rest distance, a normal monitor stand sitting on the desk would force the monitor to be too far back.
For the full breadth of a 52" monitor to be comfortably viewable for detail work, I'd have to be farther back enough that the difference between 4K and 6K wouldn't be meaningful. It's kind of like how 8k resolution can provide meaningful value in a head-mounted display two inches from your eyeballs, but 8k on a 65" living room TV seven feet away from your couch viewing position is pointless because even those with 20/10 vision can't resolve the additional detail at that distance.
For detail work I find my best ergo seating position is up close with my legs tucked well-under the desk and my stomach almost touching the edge of the curved desk inset. This allows my forearms to be supported comfortably on the desk. I also have my desk surface a little lower than most and my Aeron chair a little higher, putting the top of my legs almost touching the underside of the desktop.
To whoever needs to hear it, I will never buy another 16:9 monitor. Vastly prefer the 3:2 on my Framework and also liked an old 4:3 I had. Also great in portrait.
I’ve been using a single 24 inch 1080p benq usb c monitor after realizing 4k 27 inch scaling is just terrible and 5k 27 inch is just too pricey. It’s a budget monitor but it’s surprising what 140$ can get you these days cause the quality of the panel is really good. It supports daisy chaining so I can add another monitor to my m1 air (which I can’t otherwise I think). If it was 4k 24 inch I’d buy two as I find that size kinda perfect.
Personally I’ve found that a single monitor is enough 90% of the time while coding. It’s when I need to do something nitty gritty that I need a second monitor.
That being said working with only a laptop is painful and extremely uncomfortable for the posture. I don’t think I can get anything real done without a monitor keyboard and mouse. Going down to an 11 inch iPad sounds impossible.
For some reason nobody makes 2K 24"s anymore -- that was my sweet spot. But now to get the pixel density you have to go way bigger :/ dreading the day the old monitors I have cease working. I like the 24" size but 1080 is just so annoying. I was using 2048x1156 20" monitors back in 2010 and they had better density!
we have become used to retina displays these days so 1080p 24 inch looks 'pixelated'. I sit about 18 inches from the monitor and it looks okay. I find this distance and size most comfortable for me. The 27 inch 4k was too big for my setup and the scaled 2560x1440 is something I would not recommend (was warned about it but didn't listen :P).
I think it's called Displaylink. yet to try it with this particular benq but I know it can be done. The total output pixels are limited though so I doubt what the limitation of the Air is. but 2 24 inch 1080p should be doable.
I was hoping that 8k tvs at ~50inches would become widely available.
They were high enough density and tall enough for coding applications, but as first versions they had some rough edges (text rendering not great by default).
Instead they just disappeared from the market :(
I think Aliexpress has no brand panels, but at $600 it is a non trivial gamble.
I have a 40in 5k (32in 4k, but wider). IMHO, 138ppi is the bare minimum, but it really depends on a person's eyesight and preferences.
I would love a large-ish ultra-wide with > 160ppi. One day, maybe, that being said, by that time those things will exist and be reasonably priced, my eyes might not be able to appreciate the difference.
I'm using three 4k 32" screens arranged vertically, for 6480 x 3840 desktop size.
The only real monitor upgrade I'm willing to entertain is a ~50" 8k curved screen (basically a curved TV-sized screen), which has not been made yet AFAIK. I'm not into "ultrawide", for me it has to be "ultrawide" and "ultratall". I want all that screen real estate in high PPI.
I tried test-driving a 50" 4k TV for a week and the flatness of it was not what I wanted, it has to be a curved screen for workstation use.
100% I used to have a 43-inch 4K "monitor" (16:9). The lack of curvature meant that at the sides of the screen, there was noticeable color shifting due to variations in viewing angle. That's with an IPS panel.
Your dream is probably a ~50in 8K TV (with RGB pattern if you are on macOS), but curved. I don't know if that will ever exist.
Personally, I found that with a bigger 16:9, I would not use the top and bottom of the screen. When I "downgraded" to a 40in ultra-wide, there was not much difference in the space I was using.
What planet are those people on? That's Gucci bag territory. They can take their res and shove it, that's almost NINE GRAND (granted, Canadian pesos) for a freakin display! Who is this for, just Pixar employees?
And how much do you think the Humanscale mount costs that you would otherwise use? The Pro Display XDR is too heavy for a $30 Amazon Basics mounting arm or anything similarly cheap.
The Pro Display XDR is 7.48 kg and a $199 Ergotron LX Pro is rated up to 10 kg, so that's a fifth of the Apple stand's price.
And looking at Amazon.de listings, it's definitely possible to buy a cheap arm that's good for 7.5 kg. A "suptek Monitor Mount" is good for 10 kg according to the listing: https://www.amazon.de/dp/B0833NQ8CR
In terms of pixel count it's between Apple's 5k and 6k monitors, and its pricing is between the two. It's also far lower pixel density. So, not really.
Interestingly it has Thunderbolt 4 (40Gb), 6K typically saturates 30-31Gb, which leaves less 10Gb/s which isn't a lot especially assuming 2.5Gb network. Looks like a perfect case for TB5 and given its price.
It's a shame that this 6K tunderbolt hub monitor does not support the latest thunderbolt 5 standard. Otherwise you can connect and daisy chain two of these 6K displays together.
My desk has 2x 27" and 1x 43" Dell monitors. Unfortunately the new work MacBook only supports two external displays so one of those 27 sits idle.
What used to be nice is now a case of constantly shuffling windows, not made easy by MacOSs janky window handling.
I've been looking for a second 43" to replace the 27"s but the high price and sub-par quality of the 43 is making me wait.
I am also finding it difficult to find monitor arms that will carry such large and heavy screens. The 43 is already at the limit of the one reasonably priced arm I found and a definite struggle to mount.
I've got big monitors, that I hook up to my work laptop and my own laptop. I make it work with a kvm hub. It's really sweet, for my use.
I keep a browser, an IDE, and a terminal pretty much side by side on the bottom one. I keep slack, email, and a clock on the top monitor. I also place pullout tabs from my IDEs on the top one.
Thing is, no matter the cost range, I generally have to replace the KVM hub about once a year. I've just come to accept that as a part replacement cost. <shrug> This thing has its own KVM hub internally. Maybe I'm just rough on my KVM, but if someone puts significant wear and tear on this monitor, I'd imagine that part would wear out, which seems like a potential money sink if you have to keep calling the warranty folks.
If it’s at all representative, I had to replace 2 of the dell ultra sharp super ultra wides due to failing USB C hub / PD parts. I gave up at that point.
My 49 inch Dell ultrawide is failing too. One USB port is already dead, and the other ports have just now started to develop intermittent issues as well.
Sadly they're not super common which makes them expensive, and I don't think I've seen any that wasn't 16:9. The world has decided to go with refresh rates rather than resolution.
Which is the right choice because our eyes cannot resolve that kind of DPI at that distance.
Past 2880p on most desk monitor viewing distances or past 1080p on most TV viewing distances, you hit steeply diminishing returns. Please, please let's use our processing power and signal bandwidth for color and refresh rate, not resolution.
This is also why I think every console game should have a 720p handheld 'performance' and 1080p living room 'performance' mode. We don't need 1080p on handhelds or 2160p in the living room. Unless you're using relatively enormous screens for either purpose.
> Which is the right choice because our eyes cannot resolve that kind of DPI at that distance.
If you can’t resolve that kind of DPI at that distance you need to get an appointment because you require glasses. The low end of normal vision stops differentiating around 175 dpi at 50cm. The difference is very noticeable (and disturbing) on contrasted detailed features like text without subpixel rendering (or when the subpixel rendering does not match the physical structure of the display).
Everyone I know can immediately see a clear difference between 120 ppi and 200 ppi, but I've yet to encounter anyone who can reliably tell 120hz from 200hz. We have monitors that render lego-sized pixels at 500+ hz now, it's enough.
Gamers have been gaslit to believe they have the reflexes of spider-man and are a lost cause, but their preferences have been listened to by monitor makers for 30 years. Enough already!
Millions of office workers are working all day reading text on screens optimized for playing games at low resolutions. It's just sad.
Steve Jobs showed a decade ago that 4x resolution could be sold at great profit for normal prices. Text on screens can be as crisp as on paper.
Sadly it only became the standard on phones, not on productivity desktop monitors. It so easily could be, and it should be.
I've recently gone from 60hz to 240hz to 480hz. Refresh rate in games is not just about what it looks like. It completely changes game mechanics, like movement, recoil etc. It is such a big difference between 60hz and 240hz that you're not really playing the same game. There are things you can do at 240hz that are impossible at 60hz. At 480hz, there's also so much more time to react, so you really don't need fast reflexes to take advantage of it.
I'm guessing you play FPS competitively and are in your 20s, and for you it might be true, I won't argue that.
The issue for me is that even if your experience was true for all gamers in the world, that would still be a tiny minority compared to all people in the world who use monitors to read text, day in and day out.
A low-res monitor cannot show a high-res image, but a high-res monitor can show a low-res picture, so both sides can get what they want here.
I run 8k/60 but my screen can also do 4k/120. If it could also do 1440 at 240hz or 1080 at 480hz wouldn't bother me, but that the industry spends all effort on making 1080/480 and basically NO effort on 8k does.
The industry should throw everything below say 200ppi on the scrap-heap of history where it belongs. It would harm nobody and benefit everybody.
Right, that should be imperceptible. The 240hz monitor was also 15" while the 480hz monitor is 27". I'm sure that contributes as well. My subjective experience is that I now just have a lot of more time to react.
I have a Samsung neo g9 57" which is like 1/2 an 8k monitor (or 2 4k monitors side-by-side) which is sweet since I use picture-by-picture mode to have my work computer on one side and my personal computer on the other side.
I have the SAMSUNG 49" Odyssey Neo G9 G95NA - but despite spending literally dozens of hours - I was never able to get text to work clearly on it - either Mac or PC - tried both the DisplayPort, HDMI - tried all the (many) HDMI cables I had at home, and a couple expensive Monoprice cables, firmware updates, monitor resets, every setting I could figure - no luck. Text is just ... fuzzy in a way that it isn't with any other monitor I've ever owned - kind of a deal breaker when I spend all day in tmux.
Is it an oled display? It’s likely that the subpixel rendering does not match the physical display, so the subcolors are in the wrong location making the text worse instead of better (in the case of macs Apple entirely removed subpixel rendering some years back so there is no solution whatsoever, Apple on standard density always looks like shit).
Looks slick! In the >50" category, I've recently upgraded from the Samsung Odyssey G9 49" (with res 2x1440p) to a Samsung Odyssey G9 57" (2x4K). With a tiling window manager and workspaces it's really a pleasure to use, and contrarily to some beliefs, I do more focused work that way because I don't have to switch workspace to find the information I'm looking for – less risk of distraction.
I love the Dell Ultrasharp series, interesting they went with Thunderbolt though I had issues with it not working when trying to use another dock with my Thinkpad.
I'd rather buy the USB-C one so I know it will work with the Steam Deck, etc.
Dell has a shitty habit of down-rating monitor model numbers over time. The very expensive monitor your internet buddy waxed poetic about six months ago is now half the price and also half the monitor. It's not worth the trouble.
$2900 seems pretty reasonable to me considering the size. Works out to $416/sqft, which is much cheaper than Bay Area real estate.
I never understood the draw of these huge monitors until I had to do CAD for work and now I understand. Giant monitor + SpaceMouse is a gamechanger. My current monitor is 36” and I could easily use more width.
Do product companies visit their own websites? You have to click on three (!) overlays/popups if you visit the website - cookie notice, another popup telling me that I am not from the US and can visit their european website, and an AI alert overlay telling me about their new AI features. Only after clicking away all three I can actually see the product content. Madness.
Is HN the last refuge of real internet discourse? While some of the replies are very Reddit m-coded, it still feels like real humans. I wonder how long this will last before the agents take over.
I have a 34" ultrawide and it is huge. I can't imagine a 52" - the edges would be so far away that it must be hard to read text without physically moving left/right
Do you... usually read content in a full-screen window on that thing?
I only have a 27" monitor and sit about 2.5 feet away from it and I move my head _slightly_ to focus on different windows. But that's the reason I have a larger monitor, so I can have a bunch of normal-sized windows open at once.
If the edges of the screen are further from your eyes than the center, the content and text doesn't appear at the same size. If you wear glasses, the edges might even fall out of focus unless you physically move closer.
I like having three columns of code open in my editor, but the left edge of the leftmost column (since code is left-justified) gets pretty far away from my face. Or I need stronger glasses, one of the two.
Now I use a 38" ultrawide, which is roughly the same width (in pixels and in inches) but doesn't require my head to move up/down as much.
I could imagine using a 52" ultrawide if it were placed further away from me (i.e. deeper desk). The extra pixels would make it effectively a retina display.
I have a 42" 4k TV that I use as a monitor (in gaming mode). Not sure I would want anything shorter than that. (Of course, I have an eye issue, so the side-to-side is even more pronounced for me.
And that would strain your eyes or force a bigger font. At that point, you'd be wondering, like me, on why I spent $$ to buy a bigger screen in the first place.
I got an open box lenovo 24 inch QHD monitor for years and it just works solid across windows, mac and various docking stations. I could imagine upgrading to a 27 or 30 inch but beyond that is just too much IMO.
Maybe taller, more square could be of more use than wider.
I use 2 32" 4K which cost about $800 for both monitors. The small gap between the monitors is annoying but I can't really justify paying $2k more. Also there is a samsung dual 4k that is about the same price as the dell.
Moving my head to see everything doesn't bother me. I also have a setup with 3 32" 4k which I find a little too wide but in that setup 1 monitor connects to different computer.
I have dell with similar resolution and 32 inches. It is a decent matrix to work with code. But increasing diagonal without increasing resolution just makes it expensive tv and not something where you read text
I run a pair of the 43" model listed on the page (U4323QE). Coming from a desk full of 24" 1080P screens which I used with no scaling, the selling point for me was that the DPI was similar (~114, no scaling needed) while the total real estate was larger.
This 6K panel seems like it would scratch a similar itch.
Yes, thank you for pointing this out - I should have said it explicitly. It's why I said "product line" rather than "product". I thought the 32" vs 52" distinction would be clear for anyone who clicked through.
I also didn't realize that at the Dell store webpage, clicking the "32 inch" option actually slightly changed the product line - from U##26 to U##25 (as the 52" option is the only model associated with 2026), and generally I only consider UltraSharp's of different sizes to be "approximately equivalent in quality" if they share the same model year - and nothing yet shares the 2026 model year with this 52" option.
Interesting! If you sort their monitor reviews[0] page by "Office Rating" the top monitor is the ASUS ProArt Display PA27JCV with a score of 9.0
But their "The 5 Best Work Monitors of 2026"[1] lists a Dell Ultrasharp in the #1 rank and the Asus ProArt does not appear in the recommendations at all. The info cards imply that the recommendation rankings might result from a weighted blend of "Office Rating", "Text Clarity" and "SDR Brightness". However, the ProArt outscores the Ultrasharp in both "Office Rating" and "SDR Brightness" while exactly matching the Ultrasharp's score in "Text Clarity".
So the "The 5 Best Work Monitors of 2026" appears to be a somewhat subjective list, rather than purely a result of objective measurements.
Very large monitors are amazing. I’ve been rocking a single OLED 48” monitor for my MacBook Air M3. It is killer and I can not go back to smaller screen sizes. I just wish it was 6K or 8K instead of my current 4K. And if I do upgrade it will be to a 52/55”.
I wonder if this would work for me. I sit 36" from 43" 4K TV, I run it scaled at 125%
I think I'm already at the edge of how big of a monitor I could use without spinning my head all around. But the curvedness of it might make up for it.
4200R is very gentle curvature. Wouldn’t it have been better to curve more aggressively, like at least 2000R for such a large screen if the purpose is a desk monitor?
I have a smaller version of this and it's pretty good as a display.
I'm somewhat disappointed with it as a hub/KVM. It's better than having to swap cables, but just barely. It can't handle any high bandwidth USB devices I've tried (Focusrite Scarlett 2i2, a DSLR via capture card DSLR and a Logitech webcam). The downstream USB strangely isn't even sending down a keyboard and mouse to a PC, I ended up having to get separate dedicated KVM for those. It worked fine with a Thunderbolt to my Macs, but that's not surprising. I'm not sure how it would work with two Macs (one would have to be HDMI or DisplayPort and use that downstream USB port). I could try that but it's not my use case.
Yeah… Not sure of your model (I have the U4025QW), but mine is so close to perfect as a KVM between a Mac and 2 PC’s, if only the KVM had one more USB output port.
It takes 3 video inputs, but only 1 dedicated USB output. But oh, one of the video inputs is really Thunderbolt, so you get USB over the same cable and it works… but only if your machine supports this (for many laptops this is fine.)
But that’s 2 machines max in the KVM, while the monitor has 3 selectable inputs…
It would have been nicer if they could’ve added one more USB output, so you could have KVM match the display input for 3 machines with a single toggle.
(I have a Mac, a work desktop, and a gaming desktop, and I can toggle between the Mac (thunderbolt) and one of the PC’s, and the kvm input will follow the display’s. But I have to pick which PC I want to plug the downstream USB cable into… so I bought a little $15 USB A/B switch to help. So Mac keyboard always works, but when switching between gaming PC (hdmi) and work PC (DP) I just have to remember to toggle the A/B switch along with it to make the keyboard go to the right host.)
Size and pixel density concerns aside, one downside of larger monitors is the power draw. This burns 64W, which adds £3 to your monthly electricity bill if used for 8hrs every weekday. It's not a terrible amount, but I can run 3 micro pc servers 24/7 for that cost.
Imagine living in a so-called "civilization" in which your productivity is limited not by time or tools but by how much it costs to buy photons to shoot into your eyeballs.
I have the 40" (5K) and it's perfect. Replaced a 27-32-27 setup (the 27"s being portraits, the 32" landscape). For my coding and office work, absolutely no reason to go wider. Highly recommended.
Note the 40", and probably this one too. support MST which makes the display appear as two monitors to the OS and is great in terms of window management without going too fancy with custom software.
Likewise. I've had the 40" version for about a year. Higher DPI than the 52". It replaced 2 x 27" monitors and I'm glad I made the switch. I generally have 2 apps running side-by-side just like before, but with the ability to go full wide-screen for movies or gaming.
This monitor really does everything. It's crisp enough to read text on all day, unlike many gaming monitors. But the 120Hz is decent for gaming whereas most 5K+ monitors are only 60hz.
Interesting, I'm on 3x27" 2K monitor (same setup as you, portrait, landscape, portrait) and while it works very well for me, I'd like to replace it with just 1 screen (or 3x 4-5K monitors but that is less interesting to me). I already have custom window management software that I use so it wouldn't be hard to switch to sub-dividing 1 monitor to get a similar experience (I think).
Maybe I should look into the 40" 5K monitors, thanks!
Losing the bezel is great, and the Dell 4025qw that I have has also an IPS Black panel which is a vast improvement over what I had before - Dell U27-something (4K IPS), 3219Q (4K IPS). And it's 120hz. I really enjoy it.
I got both of my 4k dell 27" monitors for like $450 each and it's amazing. I would never pay this much. I'd just buy a 48" OLED. But that was too big. This is just silly and overpriced.
I had a Dell thunderbolt hub monitor (not sure if that was the exact name for it but functionally the same thing) in idk 2018? 1440p. Loved it. It played so well with my 2016 MBpro too. Even had HDD’s running through it. It worked fantastically from top to bottom.
For 2 years.
Obviously this is not the same product and it has been a long time. But man I hadn’t thought about that in years and now I’m all bitter about it again ha
I can recommend the 45-inch LG Ultragear too. Nice OLED. 5120x2160 resolution. Perfect curvature for me, coming from a G9.
Just don't be an idiot like I was. I connected my monitor to my dock with both DisplayPort and some random USB-C cable. Worked fine initially. One day, cleaning my office, I swapped out that USB-C cable with a higher-quality one. Took me a bit to realize that the consequent Wayland post-resume resolution flakiness came from a race condition enumerating the real-DP and USB-C-alt-mode "separate" monitors that my machine thought I now had.
It's not often that downgrading a USB cable fixes a problem.
So I use a 49" Dell U4919DW (5120 x 1440 @ 60Hz) with an Anker 777 powered Thunderbolt hub to support a MBP, but also use it directly with a lab Windows box. I can't see spending $3k on a monitor because this one was $1100 + $157.29 tax and shipping in 2022. I threw on a 4 port USB-C hub that clamps on the front bezel, so it has reachable ports.
I guess this almost replaces the Anker, but lacks Ethernet.
Looks nice enough. But seems pretty steep. The 42" TV I bought five years ago for $260 does basically the same thing. Slightly more vertical space (albeit at a lower DPI) and somewhat less horizontal. But it still supports four 80-column text windows without a sweat.
Late stage FAANGery is watching 20-somethings try to find ridiculous junk to spend money on.
More accurately, you have spotted not a Linux user in general, but a user of certain Linux distributions, which in my opinion have inadequate display configuration settings.
I am also using only Linux on all my desktops and laptops, and I have never used any display with a resolution less than 4k, for at least the last 12 or 13 years.
Despite of that, I have never encountered any problems with "scaling", because in Linux I have never used any kind of "scaling" (unlike in Windows, which has a font "scaling").
In the kind of Linux that I have been using, I only set an appropriate dots-per-inch value for the monitor, which means that there is no "scaling", which would reduce graphic quality, but all programs render the fonts and other graphic elements at an appropriate size and using in the right way the display resolution.
I configure dots-per-inch values that do not match the actual dpi values of the monitors, but values that ensure that the on-screen size is slightly larger than the on-paper size, because I stay at a greater distance from the monitor than I would keep a paper or a book in my hand (i.e. I set higher dpi values than the real ones, so that any rendering program will believe that the screen is smaller than in reality, so it will render e.g. a 12 point font at a slightly bigger size than 12 points and e.g. an A4 page will be bigger on screen than an A4 sheet of paper; for instance I use 216 dpi for a 27 inch 4k Dell UltraSharp monitor).
Emacs user. And the fonts I use have to work with anti-aliasing turned off.
Right now I'm using a Dell/Alienware AW3225DM and it's perfect for my needs (work + occasional gaming, and most of my gaming is retro). Best Buy was discounting these during the Xmas season.
I do not want anything higher than 2560x1440 because it makes my fonts look tiny, or I have to turn anti-aliasing on. Neither option is OK with me.
Any fonts look much better on a monitor with a higher resolution and the size of the fonts must not vary with the resolution of the monitor. A 4k monitor always provides more legible text than an 2560x1440 monitor.
The size of the fonts used by your documents is specified in typographic points, e.g. 12 points or 14 points. This corresponds to a fixed size on the screen, regardless of the screen resolution. The increased resolution only makes the letters more beautiful, not smaller.
If your fonts become smaller on a monitor with a higher resolution, then you are holding it in the wrong way, i.e. your operating system is badly configured and it does not know the correct dots-per-inch value for your monitor, so it uses a DPI value that corresponds to the obsolete VGA monitors.
A decent operating system should configure automatically the right DPI, because the monitor provides this value to the GPU when it is initialized.
Despite this, for some weird reason many operating systems do not use the DPI value read from the monitor to configure automatically the graphics interface, so it must still be configured manually by the user. Even worse is that the corresponding setting is frequently well hidden, so it is difficult to discover.
In any case, these endless discussions about fonts being to small on high-resolution monitors have been caused only by some incompetent morons who for inexplicable reasons have been in charge of the display settings of the popular operating systems. The user may have reasons to override the true DPI value of the monitor, but by default the OS should have always used the value provided by the monitor EDID, and then you would have never seen any change in font sizes when substituting monitors with different resolutions (except when even more incompetent Web designers specify some sizes in pixels instead of length units; allowing pixels besides length units for the sizes of graphic elements has been a huge mistake, but when this was done several decades ago, most computers did not have GPUs yet, so there were concerns about the rasterization speed in software).
I used to work in my mom and dad's print shop when I was a kid. 6 picas in an inch, 12 points in a pica, and by the time you go home your hands smell like hypo. That should give you an idea of how old I am.
For a kid I was passably good at setting up headlines for paste-up, but I never had to be the one who used an X-Acto Knife.
I'll die on the hill where 2K is better than 4K if your livelihood depends on having to stare at a screen at a distance of 60cm for upwards of 10 hours a day, longer sometimes.
I also think you missed my point about about the anti-aliasing. For various reasons I still use Windows and some of my favorite monospace fonts only exist in the the .FON format. I can emulate the X-Windows experience of using the misc-fixed-medium family and it works just fine for my needs.
I agree that on monitors with insufficient resolution ancient bitmap fonts can be sharper, because they are free of artifacts caused by mismatch between the shape of the letters and the pixel grid.
Your problem is precisely that you use monitors with a too low resolution. On monitors with a high enough resolution, you approach the quality of printed paper and you can use monospace fonts that are more beautiful than any bitmap fonts, without being able to perceive the pixels.
The only problem is that big monitors also need a bigger resolution and the combination of big size with big resolution can be expensive.
While for a size of 27" or 32" the 4k monitors can be quite cheap, I believe that at such sizes a 5k resolution is the minimum for good text rendering, and 5k monitors remain expensive.
In the limit, as pixel density increases, regular, unhinted floating-point-x text looks just like it would on a printed page. How can you get better than that? With enough resolution, you free yourself from all the hacks we've devised to make text on a computer halfway tolerable. Shouldn't doing so be the goal?
If you want that blocky-font retro look, you can use vector art to make squares.
plasma 6 for example has really good fractional scaling, i'd argue it works nicer than windows, where some old apps do not get rendered in higher resolution, some apps do not properly take advantage of it.
I mean, sure, but you're basically saying "anything other than the absolute top-end displays are absolutely awful". 133 PPI is going to be higher pixel density than >99% of desktop monitors that people are actually using.
e.g. The Steam hardware survey only goes down to 0.23% usage, and doesn't have any >4K resolution listed.
No, it is a poor pixel density when compared with a printed book, which should be the standard for judging any kind of display used for text.
At the sizes of 27" or 32", which are comfortable for working with a computer, 5k is the minimum resolution that is not too bad when compared with a book or with the acuity of typical human vision.
For a bigger monitor, a 4k resolution is perfectly fine for watching movies or for playing games, but it is not acceptable for working with text.
All of that cost less than this one monitor.
I frankly don't understand the point of such monitors. If they are placed reasonably near, they don't fit human FOV well, and the periphery is seen distorted. If they are far enough away, the pixel pitch goes well past the angular resolution of the eye.
Let's say I have an ide open, I will likely not look at the directory structure often, but I want an easy way to switch files - fantastic for having it available just by glancing over
Now you run tests, start the application etc. It also doesn't need to be in your view, all the time - but isn't it convenient to be able to just look where you know it's?
It's suboptimal for competitive gaming however, exactly for the reason you said. Scenic gaming on the other hand is improved by it, because the larger screen is more innersive
Scenic gaming seems pretty niche outside of dedicated flight/driving sim setups? And regular gaming often kind of sucks on ultrawides - way too few games have decent options to pull the HUD into the center region of the display
Same with monitors.
Either you stack huge piles of papers and work through the piles (with everything in the way all the time) or you spread them out in front of you.
How do you do it? I always give up in frustration. 100% would keep the genelecs :)
- Apps always launch on the monitor your mouse cursor is on
- Switching the focused window to the other monitor is Win+Shift+Arrow Keys
So if I clicked to open an app, it’s on the monitor I’m already looking at. If I used a keyboard shortcut, win+shift+arrow is super easy and simple.
The fact that it’s a stupid simple rule means I can get way better at just doing things by muscle memory… I don’t have to worry about being outsmarted by the window manager.
...but you can set up rules to force a given program to always launch at a specified position and dimension.
For reference I have 3 monitors (2x 4k, 1x 1080p) and am currently using Debian / Wayland and Ubuntu / X11.
But, I still have occasional problems with my monitors not waking up when I return to my desk. With 3, I've never had all 3 fail to wake, and a simple disable in the monitor settings, then choose "revert" usually brings them back.
Does windows has anything similar?
This way you only have to drag them to the monitor you want them on once on startup. Which on os x at least is not very often.
Being on the leading edge of tech costs money.
That said, your mixmatched PPIs would drive me nuts.
I'm using baby pin reciever plates on 4080 extrusion with m6 thumbscrews into drop in t nuts. There is only one c stand. The extrusion is actually two parts in a cross. The speakers are on the horizontal extrusion mounted on magic arms. My momitors are angled slightly upward and the bottom is a few inches lower than standard desk height.
If I had to do it all over again I would have 2 8030C and no subwoofer.
I’ve been debating getting genelecs for a few years now but the price jump from something like JBLs or Yamahas is so huge that I can’t justify it. At least not on my current budget.
I'm sending almost nothing to the sub, and I'm guessing the 8030s would provide most of what I'm using the 7040 for without the inconvenience.
I'm in a small room and going for accuracy, so don't need much bass.
However, there's no selections -- there's only a description of hundreds of cookies they store (e.g. 73 in Marketing section), but there's nothing to select, it's only text.
It's like the most popular form of innovation nowadays is just marginally nicer products with a massive premium on them - and I don't get how this is sustainable. Or maybe there's just way more people with massive amounts of disposable income than I realize...
There's no breakthrough of like "here's an amazing product, and by the way, it's for everyone".
This whole culture of scarcity, scalping, hoarding, FOMO, premium, it's so played out I'm literally done with it. This is paired with terrible customer support that takes customers for granted.
Very few companies seem to value their customers, and don't want to squeeze them. Tech, cars, consoles... You name it.
So this is my current stance: I'm out of the market for the foreseeable future, unless something breaks and I need to replace it. Even the "nice to have" stuff is down to almost zero.
I don't know if I'd put it on my desk, I got somewhat used to my setup - I had 2x4K 27" 144Hz monitors with very thin bezels (LG or Asus?) that I then traded in when I got a ProDisplay XDR. I do wish for higher refresh, and maybe more screen size.
What I do recommend (having bought one) is the Kuycon G32p, 32 inches @ 6K. Incredible quality and unbelievable value for money (https://clickclack.io/products/in-stock-kuycon-g32p-6k-32-in...).
This is 128 ppi, which would be considered "retina" at a viewing distance of 70cm (27in).
Are you really sitting 2 feet from a 52" monitor? I'd have to cutout a curve in the front of my desk to sit that close
https://www.upliftdesk.com/curved-corner-standing-desk/
It's not to say it's a bad option, but it's definitely not $400 out the door.
(It does seem like the resolution differs: 6016×3384 vs 6144×3456.)
Dell monitor is twice the surface area with 3/4 the pixels … or in reverse: Apple display is half the size with 30% more pixels.
(edit: corrected dell pixel %)
I think what people are trying to communicate, but struggling to, is that high pixel count on a huge display can be deceptive.
I think grandparent was trying to say “comparing a low-poi display to a high-ppi display is not a direct comparison.”
Yes I realize the Pro Display XDR has those same specs. 16:10 or 3:2 120Hz or 144Hz would be ideal to me.
https://news.ycombinator.com/item?id=46647190
If you can no longer read them because they are too pixelated, you need a higher screen resolution.
It's odd that we don't get to see a lot of high quality OEM monitors.
I'm in Norway, and I wonder if I see different prices than people from elsewhere in the world? Here it says $1.7K, and I can get the LG UltraFine 6K 32" for $2K, with the benefit of being bought from a Norwegian retailer (think guarantees and shopping security).
To be clear; I have never tried either of these monitors, so I can't tell if either is any good. :D
Sometimes this is refreshing. (display joke there, heh)
this is a big monitor.
Many UIs don't scale particularly well with very high resolution. So you get UI elements with super-fine text or icons.
Some linux console fonts are almost unreadable with just 4k, though recent releases seem to be addressing this.
also old games.
for comparison, I think this is basically the dell 43" monitor with pixels on each side (16:9 -> 21:9)
the height of the panel is similar, the width is higher (plus curvature)
This screen reminds of when I did tech support in high school and I helped a guy who bragged about his computer monitor, it was a TV running at 720p (if not lower) and a massive screen. The windows start bar was hilariously large (as were all UI elements), I had to just smile and nod until I got out of there.
Sure, your screen may be bigger but it's blurry and everything is scaled way too large.
The HiDPI/Retina bullshit is just bullshit. I've been running a 4K 43" 4:3 display at 100% scaling since 2018. It is neither blurry nor scaled too large. It can, however, comfortably fit 10 A4 pages simultaneously. Or 4 terminals + a browser + a PDF reader.
10 A4 pages do not fill a 4:3 or 3:4 aspect ratio box. They don't fill a 16:9 box either but it's more plausible, the wastage is different.
Part of it is also my fault as I thought a monitor would work with any computer.
2. That aside, what are you all using for window management on these large screens? I'm currently using Rectangle on Mac, but I was wondering if there's a better way.
[0] https://www.reddit.com/r/Dell/comments/1221mz2/dell_s3221qs_... [1] https://www.reddit.com/r/Dell/comments/n8ei34/dell_s3221qs_f...
Every monitor on every desk at work (around 3000 desks) is a Dell U3821DW - no broadscale systemic complaints that I've ever heard of.
I'm currently using my 4K 27" Dell P2715Q that I bought for $400 back in December 2017, and I've carried (physically) with me from office to office from Michigan to the Bay Area - thing runs for 10+ hours a day (minus weekend) for 8 years running. Eventually it's going to have to give in- and when it does - definitely going to buy another Dell (probably the U2725QE 27" 4K)
That said, I've always stuck for Dell's upper-range Ultrasharp (U prefix in models) monitors, being slightly wary of their cheaper series which the S in your S3221QS implies.
+1 to only buy Ultrasharp if buying from Dell. The others can be junk.
The model appears to have been released 16 years ago.
I haven't yet found a monitor that makes sense to replace them with either.
Ya, I've tried at least one of the newer versions and they were great too. 16:10 or almost anything else than 16:9 please
Also: https://www.dell.com/support/kbdoc/en-us/000331897/apple-m-p...
I’ve been using a single large monitor for a while and it’s been great with window managers. The biggest downside is when playing games full-screen.
I will never, ever buy Dell hardware again. They’re dead to me. And when the IT department at a previous job reported to me, and a Dell rep cold called me to offer us a business plan, I politely explained why I’d rather gargle broken glass than risk my reputation on a vendor who doesn’t understand what a warranty means. That felt pretty good.
I went from a 40" to a 52", and I'm just moving my head waaay too much and my shoulders hurt. It is curved, but very little imo, it's almost like it's flat. I'm going to try it for a week before making the call on whether to return it.
I feel like this needs a workflow where you do work in the middle and use the fringes for other applications that you rarely look at. Otherwise you're moving your head waaay too much and squinting a bunch.
5120x3200 in 30” would be awesome.
I have a 34 inch now, and feel like I could use more space - but it's nice to know there's an upper bound. Do you feel like there's still room to go beyond 40, or is that the sweet spot?
The center display is always actually centered. The short edge of a high-PPI 27” screen is wide enough for actual normal width browser or IDE usage, but now you get much more vertical real estate on that window.
Not nearly as much neck movement as an ultra wide and since the entire array is pretty square, the neck movement is way more balanced.
The only thing I want now is double pixel density.
Can't picture a 52" being usable as a PC monitor, really.
Kinda like this: [ | | ]
I am on mac and I use an app called Magnet to manage the windows. I will only change this setup for a larger monitor.
That being said, having this in combination with PowerToys FancyZones has been fantastic. At any given time, I'm usually running 1-4 main working windows plus Signal, Outlook, and an RSS reader. This gives me more than enough real estate to keep them all available at a moment's notice. I have roughly 40% of the screen real estate dedicated to Signal, Outlook, and my RSS client, with the interior 60% being hotkey-mapped to divide in different proportions. Compared to my old setup (one ultrawide plus two verticals) it's been awesome.
I also have a mild take that large screens make screen real estate cheap so less thought goes into user interface design. There's plenty of room just stick the widget anywhere!
My gut feeling is that the difference would be around 30-40%. Information density of the UI of OS X 10.6 and contemporary software was much higher than today's tabletized "bouncy castle" style UI.
As a personal pet peeve example, developers love to cram a search bar (or browser tabs) into the top of the window. It's more dense but it's also harder to use and drag the window.
It is almost. 4200R means the circular radius is 4.2 meters for the curve. That’s too big a radius for using as a desk monitor that large imho.
I do enjoy it, with Fancyzones, I can set up Unreal Engine Editor, Rider, discord/teams and a small corner window for searching and/or youtube watching on the side. At first I thought the pixel count was going to be too low but from my position it 'feels' retina at 125% windows scaling. Yes you can do the same with multiple monitors but I don't get the fatigue of turning my physical head, it's the perfect size to sit in middle and use your eyes to adjust/focus if that makes sense..
120hz and fast motion helps a lot. DCS World looks amazing on this, it feels like it's your full fov when playing games. Granted this isn't an OLED panel, I wouldn't play anything competitive on here but EU V and/or RTS games are very nice at 6k/52.
This replaced my dual 4K 120hz monitors. Recommend if you're not gaming.
For a cheap throwaway monitor maybe. For anything premium no way.
For the full breadth of a 52" monitor to be comfortably viewable for detail work, I'd have to be farther back enough that the difference between 4K and 6K wouldn't be meaningful. It's kind of like how 8k resolution can provide meaningful value in a head-mounted display two inches from your eyeballs, but 8k on a 65" living room TV seven feet away from your couch viewing position is pointless because even those with 20/10 vision can't resolve the additional detail at that distance.
For detail work I find my best ergo seating position is up close with my legs tucked well-under the desk and my stomach almost touching the edge of the curved desk inset. This allows my forearms to be supported comfortably on the desk. I also have my desk surface a little lower than most and my Aeron chair a little higher, putting the top of my legs almost touching the underside of the desktop.
For my desktop I am looking forward to getting a 3:2 monitor like the Benq RD280U
https://www.benq.com/en-us/monitor/programming/rd280u.html
Personally I’ve found that a single monitor is enough 90% of the time while coding. It’s when I need to do something nitty gritty that I need a second monitor.
That being said working with only a laptop is painful and extremely uncomfortable for the posture. I don’t think I can get anything real done without a monitor keyboard and mouse. Going down to an 11 inch iPad sounds impossible.
I think it's called Displaylink. yet to try it with this particular benq but I know it can be done. The total output pixels are limited though so I doubt what the limitation of the Air is. but 2 24 inch 1080p should be doable.
They were high enough density and tall enough for coding applications, but as first versions they had some rough edges (text rendering not great by default).
Instead they just disappeared from the market :(
I think Aliexpress has no brand panels, but at $600 it is a non trivial gamble.
Some other specs: refresh rate, 120Hz; brightness, 400 cd/m².
I would love a large-ish ultra-wide with > 160ppi. One day, maybe, that being said, by that time those things will exist and be reasonably priced, my eyes might not be able to appreciate the difference.
The only real monitor upgrade I'm willing to entertain is a ~50" 8k curved screen (basically a curved TV-sized screen), which has not been made yet AFAIK. I'm not into "ultrawide", for me it has to be "ultrawide" and "ultratall". I want all that screen real estate in high PPI.
I tried test-driving a 50" 4k TV for a week and the flatness of it was not what I wanted, it has to be a curved screen for workstation use.
Your dream is probably a ~50in 8K TV (with RGB pattern if you are on macOS), but curved. I don't know if that will ever exist.
Personally, I found that with a bigger 16:9, I would not use the top and bottom of the screen. When I "downgraded" to a 40in ultra-wide, there was not much difference in the space I was using.
What planet are those people on? That's Gucci bag territory. They can take their res and shove it, that's almost NINE GRAND (granted, Canadian pesos) for a freakin display! Who is this for, just Pixar employees?
We're not just talking about Apple's stand-alone display, but even their laptops are high-ppi. 13" M4 Apple Air:
> 13.6-inch (diagonal) LED-backlit display with IPS technology;2 2560-by-1664 native resolution at 224 pixels per inch
* https://www.apple.com/ca/macbook-air/specs/
There’s huge monitors from other companies that come with mounts that handle more weight than that. Granted, it’s not some art deco CNC monstrosity.
I think the sibling comment nailed it: this is just a status symbol.
And looking at Amazon.de listings, it's definitely possible to buy a cheap arm that's good for 7.5 kg. A "suptek Monitor Mount" is good for 10 kg according to the listing: https://www.amazon.de/dp/B0833NQ8CR
What used to be nice is now a case of constantly shuffling windows, not made easy by MacOSs janky window handling.
I've been looking for a second 43" to replace the 27"s but the high price and sub-par quality of the 43 is making me wait.
I am also finding it difficult to find monitor arms that will carry such large and heavy screens. The 43 is already at the limit of the one reasonably priced arm I found and a definite struggle to mount.
I keep a browser, an IDE, and a terminal pretty much side by side on the bottom one. I keep slack, email, and a clock on the top monitor. I also place pullout tabs from my IDEs on the top one.
Thing is, no matter the cost range, I generally have to replace the KVM hub about once a year. I've just come to accept that as a part replacement cost. <shrug> This thing has its own KVM hub internally. Maybe I'm just rough on my KVM, but if someone puts significant wear and tear on this monitor, I'd imagine that part would wear out, which seems like a potential money sink if you have to keep calling the warranty folks.
For me, it's too much of a risk, but YMMV.
Will definitely buy again.
https://www.eizo.com/products/flexscan/ev2730q/
... available on Amazon last time I checked ... they also make a square 2048x2048 monitor for ATC:
https://www.eizoglobal.com/products/atc/sq2826/
... although I think it costs $5k or so ...
Past 2880p on most desk monitor viewing distances or past 1080p on most TV viewing distances, you hit steeply diminishing returns. Please, please let's use our processing power and signal bandwidth for color and refresh rate, not resolution.
This is also why I think every console game should have a 720p handheld 'performance' and 1080p living room 'performance' mode. We don't need 1080p on handhelds or 2160p in the living room. Unless you're using relatively enormous screens for either purpose.
If you can’t resolve that kind of DPI at that distance you need to get an appointment because you require glasses. The low end of normal vision stops differentiating around 175 dpi at 50cm. The difference is very noticeable (and disturbing) on contrasted detailed features like text without subpixel rendering (or when the subpixel rendering does not match the physical structure of the display).
No damn it, it's not!
Everyone I know can immediately see a clear difference between 120 ppi and 200 ppi, but I've yet to encounter anyone who can reliably tell 120hz from 200hz. We have monitors that render lego-sized pixels at 500+ hz now, it's enough.
Gamers have been gaslit to believe they have the reflexes of spider-man and are a lost cause, but their preferences have been listened to by monitor makers for 30 years. Enough already!
Millions of office workers are working all day reading text on screens optimized for playing games at low resolutions. It's just sad.
Steve Jobs showed a decade ago that 4x resolution could be sold at great profit for normal prices. Text on screens can be as crisp as on paper.
Sadly it only became the standard on phones, not on productivity desktop monitors. It so easily could be, and it should be.
The issue for me is that even if your experience was true for all gamers in the world, that would still be a tiny minority compared to all people in the world who use monitors to read text, day in and day out.
A low-res monitor cannot show a high-res image, but a high-res monitor can show a low-res picture, so both sides can get what they want here.
I run 8k/60 but my screen can also do 4k/120. If it could also do 1440 at 240hz or 1080 at 480hz wouldn't bother me, but that the industry spends all effort on making 1080/480 and basically NO effort on 8k does.
The industry should throw everything below say 200ppi on the scrap-heap of history where it belongs. It would harm nobody and benefit everybody.
https://www.rtings.com/monitor/reviews/dell/u3225qe
I'd rather buy the USB-C one so I know it will work with the Steam Deck, etc.
EDIT: Oh, only one port is Thunderbolt.
On windows 11, you can only have 3 verticals columns with a monitor this wide. If I had 3 regular width monitors, I could have 6 columns overall.
I’d also imagine it looks awkward when you have one window in full screen, but I’ve never used one in person.
I never understood the draw of these huge monitors until I had to do CAD for work and now I understand. Giant monitor + SpaceMouse is a gamechanger. My current monitor is 36” and I could easily use more width.
I only have a 27" monitor and sit about 2.5 feet away from it and I move my head _slightly_ to focus on different windows. But that's the reason I have a larger monitor, so I can have a bunch of normal-sized windows open at once.
If the edges of the screen are further from your eyes than the center, the content and text doesn't appear at the same size. If you wear glasses, the edges might even fall out of focus unless you physically move closer.
But I'm getting older, so I might have to make it a big bigger soon.
Now I use a 38" ultrawide, which is roughly the same width (in pixels and in inches) but doesn't require my head to move up/down as much.
I could imagine using a 52" ultrawide if it were placed further away from me (i.e. deeper desk). The extra pixels would make it effectively a retina display.
It's akin to a 55" TV - basically the same width, but only 70% of the height.
I got an open box lenovo 24 inch QHD monitor for years and it just works solid across windows, mac and various docking stations. I could imagine upgrading to a 27 or 30 inch but beyond that is just too much IMO.
Maybe taller, more square could be of more use than wider.
Moving my head to see everything doesn't bother me. I also have a setup with 3 32" 4k which I find a little too wide but in that setup 1 monitor connects to different computer.
This 6K panel seems like it would scratch a similar itch.
I have a 4k 27" which has nice PPI and I was considering this 43" as a replacement but the pixels looked quite prominent in youtube reviews.
0: https://www.rtings.com/monitor/reviews/dell/u3225qe
I also didn't realize that at the Dell store webpage, clicking the "32 inch" option actually slightly changed the product line - from U##26 to U##25 (as the 52" option is the only model associated with 2026), and generally I only consider UltraSharp's of different sizes to be "approximately equivalent in quality" if they share the same model year - and nothing yet shares the 2026 model year with this 52" option.
But their "The 5 Best Work Monitors of 2026"[1] lists a Dell Ultrasharp in the #1 rank and the Asus ProArt does not appear in the recommendations at all. The info cards imply that the recommendation rankings might result from a weighted blend of "Office Rating", "Text Clarity" and "SDR Brightness". However, the ProArt outscores the Ultrasharp in both "Office Rating" and "SDR Brightness" while exactly matching the Ultrasharp's score in "Text Clarity".
So the "The 5 Best Work Monitors of 2026" appears to be a somewhat subjective list, rather than purely a result of objective measurements.
0: https://www.rtings.com/monitor/reviews
1: https://www.rtings.com/monitor/reviews/best/by-usage/busines...
I'm only like 2 feet from my monitor so it doesn't make sense to go any bigger than 30"
It seemed too big, at first, and I split it, but got used to it at full width.
I don't really care that much about pixel density or super-high framerate. I'm old, and don't really game. For software development, it's great.
I think I'm already at the edge of how big of a monitor I could use without spinning my head all around. But the curvedness of it might make up for it.
I'm somewhat disappointed with it as a hub/KVM. It's better than having to swap cables, but just barely. It can't handle any high bandwidth USB devices I've tried (Focusrite Scarlett 2i2, a DSLR via capture card DSLR and a Logitech webcam). The downstream USB strangely isn't even sending down a keyboard and mouse to a PC, I ended up having to get separate dedicated KVM for those. It worked fine with a Thunderbolt to my Macs, but that's not surprising. I'm not sure how it would work with two Macs (one would have to be HDMI or DisplayPort and use that downstream USB port). I could try that but it's not my use case.
It takes 3 video inputs, but only 1 dedicated USB output. But oh, one of the video inputs is really Thunderbolt, so you get USB over the same cable and it works… but only if your machine supports this (for many laptops this is fine.)
But that’s 2 machines max in the KVM, while the monitor has 3 selectable inputs…
It would have been nicer if they could’ve added one more USB output, so you could have KVM match the display input for 3 machines with a single toggle.
(I have a Mac, a work desktop, and a gaming desktop, and I can toggle between the Mac (thunderbolt) and one of the PC’s, and the kvm input will follow the display’s. But I have to pick which PC I want to plug the downstream USB cable into… so I bought a little $15 USB A/B switch to help. So Mac keyboard always works, but when switching between gaming PC (hdmi) and work PC (DP) I just have to remember to toggle the A/B switch along with it to make the keyboard go to the right host.)
Note the 40", and probably this one too. support MST which makes the display appear as two monitors to the OS and is great in terms of window management without going too fancy with custom software.
This monitor really does everything. It's crisp enough to read text on all day, unlike many gaming monitors. But the 120Hz is decent for gaming whereas most 5K+ monitors are only 60hz.
Maybe I should look into the 40" 5K monitors, thanks!
My 38" LG goes up to 144Hz. I would have figured something larger would be at least that much.
For 2 years.
Obviously this is not the same product and it has been a long time. But man I hadn’t thought about that in years and now I’m all bitter about it again ha
Just don't be an idiot like I was. I connected my monitor to my dock with both DisplayPort and some random USB-C cable. Worked fine initially. One day, cleaning my office, I swapped out that USB-C cable with a higher-quality one. Took me a bit to realize that the consequent Wayland post-resume resolution flakiness came from a race condition enumerating the real-DP and USB-C-alt-mode "separate" monitors that my machine thought I now had.
It's not often that downgrading a USB cable fixes a problem.
I guess this almost replaces the Anker, but lacks Ethernet.
Late stage FAANGery is watching 20-somethings try to find ridiculous junk to spend money on.
if you truly want a great display for productivity, I can't recommend the Samsung 57 enough. 240hz, 2x4k in one panel. it's great.
LOL
BUT.... this is perfect for folks that want to use one monitor for both work, and as/for entertainment /just normal tv watching in a living room.
I am also using only Linux on all my desktops and laptops, and I have never used any display with a resolution less than 4k, for at least the last 12 or 13 years.
Despite of that, I have never encountered any problems with "scaling", because in Linux I have never used any kind of "scaling" (unlike in Windows, which has a font "scaling").
In the kind of Linux that I have been using, I only set an appropriate dots-per-inch value for the monitor, which means that there is no "scaling", which would reduce graphic quality, but all programs render the fonts and other graphic elements at an appropriate size and using in the right way the display resolution.
I configure dots-per-inch values that do not match the actual dpi values of the monitors, but values that ensure that the on-screen size is slightly larger than the on-paper size, because I stay at a greater distance from the monitor than I would keep a paper or a book in my hand (i.e. I set higher dpi values than the real ones, so that any rendering program will believe that the screen is smaller than in reality, so it will render e.g. a 12 point font at a slightly bigger size than 12 points and e.g. an A4 page will be bigger on screen than an A4 sheet of paper; for instance I use 216 dpi for a 27 inch 4k Dell UltraSharp monitor).
Right now I'm using a Dell/Alienware AW3225DM and it's perfect for my needs (work + occasional gaming, and most of my gaming is retro). Best Buy was discounting these during the Xmas season.
I do not want anything higher than 2560x1440 because it makes my fonts look tiny, or I have to turn anti-aliasing on. Neither option is OK with me.
The size of the fonts used by your documents is specified in typographic points, e.g. 12 points or 14 points. This corresponds to a fixed size on the screen, regardless of the screen resolution. The increased resolution only makes the letters more beautiful, not smaller.
If your fonts become smaller on a monitor with a higher resolution, then you are holding it in the wrong way, i.e. your operating system is badly configured and it does not know the correct dots-per-inch value for your monitor, so it uses a DPI value that corresponds to the obsolete VGA monitors.
A decent operating system should configure automatically the right DPI, because the monitor provides this value to the GPU when it is initialized.
Despite this, for some weird reason many operating systems do not use the DPI value read from the monitor to configure automatically the graphics interface, so it must still be configured manually by the user. Even worse is that the corresponding setting is frequently well hidden, so it is difficult to discover.
In any case, these endless discussions about fonts being to small on high-resolution monitors have been caused only by some incompetent morons who for inexplicable reasons have been in charge of the display settings of the popular operating systems. The user may have reasons to override the true DPI value of the monitor, but by default the OS should have always used the value provided by the monitor EDID, and then you would have never seen any change in font sizes when substituting monitors with different resolutions (except when even more incompetent Web designers specify some sizes in pixels instead of length units; allowing pixels besides length units for the sizes of graphic elements has been a huge mistake, but when this was done several decades ago, most computers did not have GPUs yet, so there were concerns about the rasterization speed in software).
For a kid I was passably good at setting up headlines for paste-up, but I never had to be the one who used an X-Acto Knife.
I'll die on the hill where 2K is better than 4K if your livelihood depends on having to stare at a screen at a distance of 60cm for upwards of 10 hours a day, longer sometimes.
I also think you missed my point about about the anti-aliasing. For various reasons I still use Windows and some of my favorite monospace fonts only exist in the the .FON format. I can emulate the X-Windows experience of using the misc-fixed-medium family and it works just fine for my needs.
I've tried most of the fonts here, but none of them really do it for me: https://www.nerdfonts.com/font-downloads
But if you want to keep going on with the pedantry, have at it. Were you around in the Usenet days?
Your problem is precisely that you use monitors with a too low resolution. On monitors with a high enough resolution, you approach the quality of printed paper and you can use monospace fonts that are more beautiful than any bitmap fonts, without being able to perceive the pixels.
The only problem is that big monitors also need a bigger resolution and the combination of big size with big resolution can be expensive.
While for a size of 27" or 32" the 4k monitors can be quite cheap, I believe that at such sizes a 5k resolution is the minimum for good text rendering, and 5k monitors remain expensive.
If you want that blocky-font retro look, you can use vector art to make squares.
e.g. The Steam hardware survey only goes down to 0.23% usage, and doesn't have any >4K resolution listed.
At the sizes of 27" or 32", which are comfortable for working with a computer, 5k is the minimum resolution that is not too bad when compared with a book or with the acuity of typical human vision.
For a bigger monitor, a 4k resolution is perfectly fine for watching movies or for playing games, but it is not acceptable for working with text.
Pointing out to the other guy that their reply made no sense?
> There's no point to making a 400dpi 32" display
Thank you captain obvious.
You do know that there are densities between 130 and 400+ though, right?
There’s a gulf between 130 dpi and 460 dpi, and in that gulf there are densities which stop being poor at monitor viewing distances.
That smartphone densities are excessive for that purpose does not make middling standard densities good.