Inkling 2 Mini

(thinkingmachines.ai)

427 points | by jasondavies 2 hours ago

28 comments

  • jakswa 1 minute ago
    The demo video was 32 tok/s and did a 15X speedup when generating the code? Weird that they didn't publish token speeds for this laptop setup they recorded. I'm worried this tri-loop setup is going to be too slow. QFN is impressive but lately been feeling a little brain-fried by its prose.
  • montroser 1 hour ago
    This is bonkers good if these benchmarks hold up in real-world scenarios. To be at the level of Qwen3.8-27B with a looped transformer model is quite the flex. They just left this note on reddit:

    Hope that folks find this model more amenable to local usage - the sizing was largely informed by what folks on this subreddit ask for the most haha!

    There are two particularly interesting aspects of this model for local users:

    We do our training end-to-end in nvfp4, and although we haven't exhaustively benchmarked this, folks like Unsloth have noticed that our models seem to respond very well to being quantized, maintaining 90% top-1 even at at 1-bit quantization.

    This model is looped, which allows more depth at the same parameter count, which we particularly notice seems helpful for coding tasks. :)

    This is our first model targeted at local users, so let us know how this model is and anything you want to see out of future iterations!

    https://www.reddit.com/r/LocalLLaMA/comments/1y1diuk/thinkin...

  • monksy 1 hour ago
    The GGUF version of this that can run on Ollama/Llama.cpp is: https://huggingface.co/unsloth/Inkling-2-Mini-GGUF
  • lilytweed 56 minutes ago
    Whoa, not just a model that acknowledges and embraces using a looped architecture (GPT Astra 6+ and Sol 6.1+ are only [heavily] rumored to be looped), but it's open weights, too?

    I'm willing to wager that most open models will go looped in the wake of this.

    Wonder what it means for safety and interpretability at this level of availability.

    • XenophileJKO 30 minutes ago
      This has been my line of thought for a years. If we are aiming for on device intelligence, looping (or other methods of parameter reuse) are one of the best methods since consumer hardware is primarily memory constrained.

      Which is counter to the way most open weight models have been leaning. Many current models are MoE (Mixture of Experts) which by their very nature are parameter heavy. They are trading parameter efficiency for compute efficiency which is kind of the wrong tradeoff for current consumer hardware like gaming GPUs.

      • coder543 21 minutes ago
        Consumer hardware doesn't really boil down to a single constraint on how much memory is available, in my opinion.

        Consumer hardware has limited memory, limited memory bandwidth, limited compute, and limited storage. Any model designed for consumer hardware needs to tackle all four, while still optimizing for intelligence.

        MoEs save on both memory bandwidth and compute compared to a same-size dense model, and importantly, MoEs can still run quickly even with partial offloading. People have even demonstrated getting pretty good performance out of MoEs streaming from SSD with careful optimization.[0] Dense models fall apart if they aren't run entirely in the fastest memory pool.

        Memory bandwidth is scarce on consumer laptops and smartphones. Looping demands even more memory bandwidth than running the same parameters once, so it is not an obvious win. If looping can make the model significantly more intelligent, it might be worthwhile. It is interesting to see a MoE combined with looping, as with Inkling 2 Mini. On your point about memory being the constraint, looping increases the size of Inkling 2 Mini's KV cache because the looped layers don't share KV between loops.

        With DSpark-style specdec getting better and better, dense models make more sense than they used to since you can amortize the memory bandwidth better. The problem is then prefill (prompt processing), since specdec does nothing to help with that, and processing long inputs (search results, reading documents, etc) will still feel very slow. A MoE can breeze through that same prefill since it doesn't need as much compute.

        With the introduction of Engrams/PLEs, model designers now have another axis for adding knowledge to models at the cost of storage, with comparatively little additional compute or memory bandwidth.

        There are tradeoffs on everything. Despite my own extensive testing of different models on different hardware setups, I have not found any one-size-fits-all model architecture for consumer hardware. It is a hard problem. Small models are getting better all the time, and I think even smartphone-sized models will pass the threshold of usable intelligence for most people in the next year. Spark-X2.6-4B[1] and LFM3-1.7B[2] are surprisingly good for their sizes. Inkling 2 Mini looks great, supposedly offering Qwen3.8-27B's intelligence with much less compute required.

        [0]: https://huggingface.co/openbmb/MiniCPM-V-4.7-35B-A3B#on-devi...

        [1]: https://huggingface.co/XHToken/Spark-X2.6-4B

        [2]: https://huggingface.co/LiquidAI/LFM3-1.7B

    • coder543 43 minutes ago
      It's not the first notable open weight looped transformer:

      https://huggingface.co/Nanbeige/Nanbeige4.2-3B

      https://huggingface.co/nvidia/NVIDIA-Nemotron-Labs-Dory1.0-4...

      https://huggingface.co/sensenova/SenseNova-Loop-9B

      But, Inkling 2 Mini is the first open weight MoE looped transformer of any note that I've seen (the others are dense models), and the benchmark scores really do look incredible.

      If it can outsmart Qwen3.8-27B while using substantially fewer active parameters... this is going to be really great.

  • rsolva 1 hour ago
    Going to test this right away on my AMD 7900XTX and see how it does compared to Qwen 3.8 27B (or DaisyRose 27B that I'm currently running). Given that Inkling 2 Mini is a MoE, it should provide way higher decode speed, but with comparable performance. Exiting!
    • IAmGraydon 48 minutes ago
      >Exiting!

      OK, but please come back and let us know your results!

      • rsolva 33 minutes ago
        Got it to run, but a few bumps in the road – mostly because this is a very fresh model.

        Flash Attention (FA) is not supported on the current llama.cpp (at least not for ROCm) for this model so KV cache is forced to f16 for the value (V) and I cannot lower it to q4 go get decent KV cache. But the key (K) could be set to q4, and that got me about 100k of ctx. Current benching shows ~28 tok/s decode and ~481 tok/s prefill.

        It's a start, but I expected better speeds even on a non ideal setup. I'll keep experimenting!

    • AndrewKemendo 1 hour ago
      Please reply when you have tested it I’m curious.

      Also do you know what the best local setup is?

      • jakswa 1 hour ago
        I had astra patch in both required llama.cpp PRs and it's passing a few tests locally on my 7900XTX so far, but ~500 tok/s prefill and ~26 tok/s decode are sobering: The new three-time-looping might be cutting speeds. Maybe there's something here still though, maybe it needs less reasoning output for results to be usable/good? More testing needed!

        edit: found some oudated mesa/radv/shaderc/glslang packages to update, and up to 34 tok/s now. MORE MORE

        edit2: trying to see if this dspark drafter is usable and will give a good speed boost, didn't load up on first attempt. I'm probably too early [5-10min later] ... found an unsloth llama.cpp build with vulkan dspark support and it actually slowed down decode :(

        • rsolva 1 hour ago
          Hm, that seems strangely slow. Qwen3.8-27B/DaisyRose-27B Q4 currently run with ~66 t/s and ~800 t/s prefill with 3 slots and about 190k kv cache. It performs really well so far.
          • jakswa 1 hour ago
            Yeah I've had 27B (dense model) up to similar speeds on this setup as well. I'll hold off to compare my speeds to others, maybe it's too early or it's particular to my setup.
        • enlyth 46 minutes ago
          I'm getting 700 tok/s prefill and 52tok/s generation on a 5090 RTX, not bad
          • shadowpho 14 minutes ago
            That seems slow, should be much much faster hmmm
          • jakswa 31 minutes ago
            5090 RTX is like 1800GB/s? I bet you were seeing much higher speeds on Qwen 3.8 27B right?
      • rsolva 1 hour ago
        For 7900XTX you mean? I run Fedora Silverblue 44 at the moment and could share my current containerized setup with DaisyRose 27B.
    • xlayn 44 minutes ago
      Hey, just in case.. I have been maintaining this fork of llama.cpp, I run also 7900XTX, 3 in my case... and I want to know if you see improved speed... notice the ngram mod where instead of loosing the ngrams they are stored in disk, I have a 31M slot and so far it's being working really nice for me

      I'm seing around 2800t/s on pp at the very beginning of the conversation, and then going to around 800 by the 256k context size...

      I've also update the value in the gguf to have instead of context size 256k be triple and have use it all the way to around 600k context size

      use the cache eviction branch https://github.com/alainnothere/llama.cpp/tree/disk-cache-ev...

      llama-server -m /path_to_model/Qwen3.8-27B-UD-IQ4XS_u.gguf -np 2 --host 0.0.0.0 --port 8089 --kv-unified --temp 0.2 --top-k 20 --min-p 0.0 --cache-disk-path /path_to_store_conversations_to_disk --cache-ram 100 --cpu-range 0-23 --reasoning-budget 4096 --reasoning-budget-message "... I am thinking for too long -- let me gather more info about the task." --no-cache-idle-slots --spec-draft-auto --spec-draft-sampling probabilistic --spec-draft-n-min 1 --spec-draft-p-min 0 --spec-ngram-auto --spec-ngram-mod-size 35544320 --spec-ngram-mod-cache /path_to_storage_of_ngram_mod_this_is_specific_per_model/ngram-mod-qwen3.8-27b.bin --fit on --device Vulkan3,Vulkan2,Vulkan1 --fit-target 1024,2560,2560 --ctx-checkpoints 25 --checkpoint-spill-max 25 --cache-type-k f16 --cache-type-v f16 -ctkd q8_0 -ctvd q8_0 -devd Vulkan3 --spec-type draft-mtp,ngram-mod --spec-draft-n-max 7 --spec-ngram-mod-n-min 7 --spec-ngram-draft-n-max 31 --spec-rs-depth 24 --fit-verify on

      Use this if you have 3 cards, if you have less maybe just remove it -b 8192

      In case you want to know how many tokens you have use, --token-ledger /path_to_where_you_want_to_store_stats/token_ledger.json

      here is how logs look like I saw a 350t/s on tg but was because you hit ngram mod tables over things the model has already seen

      457.04.985.808 I srv print_line: token ledger: requests = 27077, prompt = 3928887769 (cached = 3874707808, processed = 47151296), generated = 22126308 (reasoning = 15129037), t> 457.04.985.913 I slot rq_write_fin: id 0 | task -1 | request timeline: task 77431, ttft 1580.0 ms (http 20.4, tokenize 65.1, queue 247.1, select 0.0, restore 2.7, prompt 1244.3),> 457.05.202.640 I srv handle_compl: task created: conversation_id=64d89c6d7ff76923 (tokens 0..18489, system+first_user) 457.05.202.757 I slot get_availabl: id 0 | task -1 | selected slot by LCP similarity, f_sim_best = 0.994 (> 0.100 thold), f_keep = 1.000 457.05.206.552 I slot launch_slot_: id 0 | task 77458 | processing task, is_child = 0 457.05.207.188 I slot operator(): id 0 | task 77458 | prompt processing batch, tokens 81032..81036 of 81552 457.05.246.405 I slot operator(): id 0 | task 77458 | prompt processing batch, tokens 81036..81548 of 81552 457.05.310.149 I srv lazify_check: checkpoint: converted pos_min=80943 to disk-backed ('cp_64d89c6d7ff76923_80943.bin', 149.6 MiB released) 457.05.872.722 I slot operator(): id 0 | task 77458 | prompt processing batch, tokens 81548..81552 of 81552 457.05.943.921 I srv lazify_check: checkpoint: converted pos_min=81035 to disk-backed ('cp_64d89c6d7ff76923_81035.bin', 149.6 MiB released) 457.09.000.990 I slot print_timing: id 0 | task 77458 | n_gen = 340, tg = 112.88 t/s, tg_3s = 113.20 t/s 457.11.161.223 I slot print_timing: id 0 | task 77458 | prompt eval time = 790.96 ms / 520 tokens ( 1.52 ms per token, 657.43 tokens per second) 457.11.161.226 I slot print_timing: id 0 | task 77458 | eval time = 5163.27 ms / 642 tokens ( 8.06 ms per token, 124.15 tokens per second) 457.11.161.226 I slot print_timing: id 0 | task 77458 | total time = 5954.23 ms / 1162 tokens 457.11.161.227 I slot print_timing: id 0 | task 77458 | graphs reused = 72319 (pp skipped 525) 457.11.161.228 I slot print_timing: id 0 | task 77458 | graphs prebuilt = 7295 (hit 6975, miss 320) 457.11.161.229 I slot print_timing: id 0 | task 77458 | early prebuilt = 28686 (fit 44246, hit 26411, miss 2275, aborted 0, 96584.2 ms host) 457.11.161.238 I slot print_timing: id 0 | task 77458 | draft acceptance = 0.83204 ( 535 accepted / 643 generated), mean len = 6.00 457.11.161.243 I slot print_timing: id 0 | task 77458 | draft auto = n=6 | 1:55.4 t/s [2.00 tok / 36.1 ms] (4) 2:67.7 t/s [2.50 tok / 37.0 ms] (4) 3:101.0 t/s [4.00 tok / 39.6 ms> 457.11.161.251 I slot print_timing: id 0 | task 77458 | draft by impl: draft-mtp | steps 101 | built 5.5 | offered 5.5 | accepted 4.9 (0.90) | full 80 | step 45.2 ms | 131.5 t/s > 457.11.161.257 I slot print_timing: id 0 | task 77458 | draft by impl: ngram-mod | steps 6 | built 64.0 | offered 14.3 | accepted 6.0 (0.42) | full 1 | step 90.8 ms | 77.1 t/s | > 457.11.161.258 I slot print_timing: id 0 | task 77458 | ngram policy: auto on | cap now 12 | cap min 7 median 12 max 31 over 6 chains | cap bound 6 | whole ema 0.17 | resume 0 | > 457.11.161.259 I slot print_timing: id 0 | task 77458 | spec rollback: prebatch restores 1 | host checkpoints 0 | checkpoint restores 0 457.11.161.260 I slot print_timing: id 0 | task 77458 | chain truth: ngram | chains 6 | censored 0 | would land mean 7.0 | full 0 | hist 0:0 1-4:1 5-8:3 9-16:2 17-32:0 33-48:0 49> 457.11.161.261 I slot print_timing: id 0 | task 77458 | ngram gate: held 38 | agree 5 (would land 0:0 1-4:1 5-16:4 17+:0, pending 0) | disagree 33 (would land 0:33 1-4:0 5-16:0 1> 457.11.161.261 I slot print_timing: id 0 | task 77458 | ext shadow: mtp+ngram | attempts 101 | hits 85 | tested 68 | landed mean 0.4 (over tested) | hist 0:65 1-4:1 5-8:0 9-16:2 > 457.11.161.262 I slot print_timing: id 0 | task 77458 | alt table: n=48 | attempts 101 | hits 45 | would land mean 0.0 | hist 0:45 1-4:0 5-8:0 9-16:0 17-32:0 33-48:0 49-64:0 65+:> 457.11.161.263 I slot print_timing: id 0 | task 77458 | mtp ahead: tried 53 (0 after a p_min stop) | verify full 49 | bonus matched 48 (0 after p_min) | too short 0 | served 48 s> 457.11.161.265 I slot print_timing: id 0 | task 77458 | mtp confidence: stop cap:101(acc 4.9) pmin:0(acc 0.0) other:0 | p bins landed/tested: <0.5 1/3 0.5 0/1 0.6 1/1 0.7 0/0 0.8> 457.11.163.234 I slot release: id 0 | task 77458 | stop processing: n_tokens = 82195, truncated = 0 457.11.163.426 I srv print_line: token ledger: requests = 27078, prompt = 3928969321 (cached = 3874788840, processed = 47151816), generated = 22126950 (reasoning = 15129071), t> 457.11.163.526 I slot rq_write_fin: id 0 | task -1 | request timeline: task 77458, ttft 884.3 ms (http 21.2, tokenize 68.3, queue 0.1, select 0.0, restore 3.3, prompt 791.0), gen> 457.11.396.231 I srv handle_compl: task created: conversation_id=64d89c6d7ff76923 (tokens 0..18489, system+first_user)

  • yread 1 hour ago
    Recently SensaNova also released a looping model with unbelievable numbers

    https://www.sensetime.com/en/news/sensenova-loop-9b-release-...

  • 2001zhaozhao 1 hour ago
    I think this model will be a crazy big deal, it might be the first model that can reliably run multi-agent reasoning harnesses on local hardware, as this is a MoE model and can have several agents each with their own KV caches that fit into VRAM.

    Dethroning Qwen 3.8 is a big deal too, and I like their section about CoT monitorability. (This model beats Qwen on benchmarks - TML is not known to benchmaxx nearly as hard as Qwen.) I guess TML really are a bunch of rationalists who know what they're doing, sort of like Anthropic.

    • bpavuk 43 minutes ago
      > TML really are a bunch of rationalists who know what they're doing

      yes

      > sort of like Anthropic.

      no. Anthropic are not "rationalists," they are absolute fear-mongers. from "no software developers in 6 months" to "this could enable bioterrorism so we do not even let you mention the word 'virus' in any context", I do not see a hint of rationality.

      • ungovernableCat 25 minutes ago
        I wonder how Ant's corporate culture will change now that so many employees will have secured some quite luxurious nest eggs.

        Maybe they'll chill out a bit?

      • thereader12 24 minutes ago
        I mean I thinkhe meant like big R Rationalist like Effective Altruism or whatever other spin offs is du jour.
  • Almondsetat 44 minutes ago
    What are some models in this ballpark that are also good at conversation? They always show off their software capabilities, but can it talk naturally? make creative stories?
    • hunterloftis 1 minute ago
      The closest to this that's also good at prose is gemma4 26b a4b. That's what I'm using for a fully-local "Tunnel Goons" (light D&D-style game) harness where multiple player agents and a DM agent improvise a story together.

      I haven't tried inkling so I have no idea how it speaks, writes, and tells stories. I'd love to know what other small models folks are having success with in role-play, gaming, creative writing environments.

  • gchadwick 1 hour ago
    Very interesting to see them publish a looped transformer. It's been reported that OpenAI are now using looped transformers, though of course not confirmed.

    I think this may be the first public example of a looped transformer model good enough for real world use cases?

  • mattnewton 2 hours ago
    Benchmarks look good, and inkling 2 small felt better than the benchmarks suggested, so I am very excited to play with this.

    From a research perspective, I'm even more interested in the varlooped variant they're releasing https://thinkingmachines.ai/model-card/tml-d24-varloop-resea... I'm not aware of any other working open source models like that.

    • liuliu 2 hours ago
      My current feedback on Inkling 2 Small: 1. it feels intelligent, and can solve open problems throw at it like other quasi-frontier models (DeepSeek 4 Flash 0731 / DeepSeek 4.1 Flash 1017 / GLM 5.3 Flash etc). 2. its responses sometimes can be odd (they are honest about it in the blog post!), can have wrong use of markdown syntax, sometimes overly brief, etc. 3. tool uses are good, but sometimes have some old take on tools (too quickly to assume image generation tools cannot do text etc).

      EDIT: by "open problems", I meant the problems I don't really formulate how to solve it first in my mind and then throw to it. I just describe what I want and let it to figure it out.

    • kcb 2 hours ago
  • armcat 24 minutes ago
    I didn't even know it was a thing to train using nvfp4 4-bit floats - I always thought it was a post-training quantisation thing. Fascinating!
  • stillpointlab 59 minutes ago
    I'm guessing one of these local model companies will get picked by Apple sooner or later. It is just so within their business model and they have the hardware.
    • bigyabai 44 minutes ago
      Probably not for the foreseeable future. Apple penned a "multi-year collaboration" with Google to build their foundation models for them: https://blog.google/company-news/inside-google/company-annou...
    • halJordan 47 minutes ago
      Apple refuses to pay ai engineers an ai engineer salary. They're not going to acquire one of these companies until the cost of issuing them is within their comfort zone.
      • KeplerBoy 34 minutes ago
        Do you really think ai engineers will forever be able to command 2026 ai engineer salaries?
  • causal 36 minutes ago
    Big fan of open weights but those Terminal Bench numbers are pretty abysmal, and I find that tends to track "agent usefulness" more than most SWE benchmarks.
  • gok 1 hour ago
    Very cool, and the also released a research version with variable looping support: https://huggingface.co/thinkingmachines/TML-d24-varloop-rese...

    Idea being you can configure at run time how much thinking you let the model do per token.

  • sourcecodeplz 9 minutes ago
    Even more talkative than Qwen
  • jakswa 1 hour ago
    The masses lying in wait for Qwen 4 cry out in joy. A savior? Could it be?!
  • WiSaGaN 1 hour ago
    This is actually a big deal. I think probably by 2028 we will get a large number of daily tasks done reliably by laptop size local models.
  • xlayn 1 hour ago
    When you are sure enough about what you are doing to include Qwen 3.8 27B in your compare.. we know you are talking... let's test drive it!
  • walrus01 2 hours ago
    Looking at the link to quantizations it looks like unsloth has already quantized it:

    https://huggingface.co/thinkingmachines/Inkling-2-Mini

    https://huggingface.co/unsloth/Inkling-2-Mini-GGUF

    In terms of the active parameters and token/s on slow or less capable hardware it seems like it should be in the same general performance category as qwen 3.6 35B A3B.

  • jakswa 1 hour ago
    When inkling first released I tested it out and thought it was the best prose from an LLM in my quick sampling -- easy-reading and easy to understand. Big hopes I can write code with one of these models one day.
    • summarity 1 hour ago
      Absolutely. Inkling for prose (and vision), Deepseek 10XX for code are the sweet spot right now (they swap places for these jobs on my rig)
  • neya 2 hours ago
    Wow, that coding demo was super impressive. Can't wait to try it out. Just need to wait for the hardware market to cool down a bit so we can run these on our own commodity hardware.
  • lwarfield 1 hour ago
    Omg I've been working on the same thing! I was doing this off a hunch from David Noel ng's RYS posts!

    https://dnhkng.github.io/posts/rys/

    • mapontosevenths 28 minutes ago
      I tried that for awhile too. Fun tip: You don't have to retrain the entire model after looping it to make it coherent again.. Just pick layers carefully then repair the residual by doing some parent distillation. ;)

      That took me from needing to rent space in avast to just running it locally on my sparks and getting comparable results.

      I also discovered that you can fix a lot of the damage caused by quantization the same way. Just do 200-500 rounds of parent student distillation with everything frozen but the residual, often the quantized version will improve drastically.

  • holistio 1 hour ago
    I'm starting to believe Gestalt is actually theirs. This is very nice.
  • lenerdenator 1 hour ago
    This looks like it could run on my M2 32GB MBP.

    I honestly would rather have nice, focused-purpose local models than huge "let's make AGI" datacenter-hosted models. Will have to try it tonight when I get home.

    • segmondy 18 minutes ago
      32gb is more than enough to run it!
  • christkv 2 hours ago
    I'm loving this trend. My framework desktop is looking like a better and better investment.
    • Iolaum 1 hour ago
      Indeed. I 've been using Sage A1.5 35b-A3b to have more speed because of strix halo limited memory bandwidth. Looking forward to testing Inkling-2-mini once it has lamma.cpp support. Genuinely excited from a model outside Qwen3.6-35B-A3B ecosystem competing in that space.

      P.S. Qwen3.8-Flash-Next is also a very good model for Srix-Halo/128Gb Framework Desktop but I liked to have more RAM for other things as well even when I was running it in Q4. Usable though.

    • rapind 1 hour ago
      What are you running on it? DSF 4.1?
      • christkv 50 minutes ago
        DSF 4.1 and Qwen 3.8 27b. I have to switch linux distro though been on Bazzite and the Fedora Atomic underpinnings is just killing me for this stuff just makes it harder than it needs to be to install stuff.
    • topaztee 1 hour ago
      tell me more about this framework desktop..
      • christkv 48 minutes ago
        It's just a ryzen 395 ai max box with 128GB but that I was lucky to buy before the ramagedon happened. It just happens to run a fair bit of open source models decently and the models are getting better. I got it for 2100 EUR and now it looks like a steal.
  • AndrewKemendo 1 hour ago
    Can anyone running one of these locally give any sense of how good they are?
  • gigatexal 1 hour ago
    [dead]
  • kypro 56 minutes ago
    > Efficient intelligence makes Inkling 2 Mini a great choice for inference where speed is paramount, or for running on local hardware.

    Presumably v. good for offensive use cases too.

    And a looped model?

    This and GRH is +0.1% on my p-doom today.

    The trends of capabilities and efficiency we've seen over the last few weeks should terrify anyone with any sense.

    This will not end well but we'll have some nice AI generated dashboards until then I guess.

    • bigyabai 35 minutes ago
      Anyone following the news is aware that we've had Mythos-comparable cyber red-teaming capabilities for quite a few months now. The sky hasn't fallen, instead people have been using it for reverse engineering, postmortems, pentesting and decomp projects. In a world where frontier labs and governments can coordinate large-scale cyberattacks with AI, having an uncensored open cyber model is necessary for defending against them. The alternative is much worse.

      But hey, you're welcome to increment your P(doom) until the year 2057 if it makes you feel better. Maybe the government will finally put their foot down with the release of Qwen 28, which according to OpenAnthropicTimeWarnerPepsico will have unprecedented puppy-kicking use cases that necessitate regulation.

      • hypfer 26 minutes ago
        May I suggest adding Comcast to that name
        • bigyabai 17 minutes ago
          Not without triggering antitrust concerns, no.