Chasing an audio artifact on power loss

(subalpinecircuits.com)

59 points | by ireflect 3 days ago

5 comments

  • olelele 17 hours ago
    Hey cool device!

    Seems like it sounds good to, from the demo video.

    In hifi amps from 1980-94 or so they implement speaker protection with relays that switch out the speakers before the thump of turning on or off the psu.

  • PowerElectronix 12 hours ago
    I would still use mlcc for the bulk capacitance. Use 12V or 25V ones to not have to worry about voltage bias. You can get quite a lot of capacitance in 0805 these days.
    • grmnygrmny2 12 hours ago
      Okay, that’s a good tip! I freaked myself out and didn’t want to make another mistake on the next board, but it would be nice to stick with the MLCC.
      • jLaForest 11 hours ago
        its called 'derating' and it happens with voltage and frequency too.
  • fnord77 14 hours ago
    I was confused what an SA-01 was and I googled and it came up Casio SA-01 keyboard. But that's apparently unrelated to this project
    • multjoy 14 hours ago
      https://subalpinecircuits.com/about/

      >My name is Drew, I'm an engineer in Vancouver, Canada. I worked at Bandcamp for 13 years and now I build synthesizers and other audio electronics. My first product, SA-01, will be out in early 2027.

  • ErroneousBosh 11 hours ago
    TL;DR vibecoder discovers power supply decoupling and fails to reinvent muting circuits.
    • alter_igel 15 minutes ago
      What about this is vibecoded? And the whole point of the blog is that the DAC daughterboard already has its power management and muting circuit and yet fails under very specific but easily encountered conditions.