We also got UDB (D6), the one-byte variant that arrived with x86-64 for 64-bit mode.
And we have always had UDW (FF FF), aka group #5 (1st FF) with a modrm byte of mod=11b r/m=111b (/7) reg=111b (2nd FF) -- that one matters for memory with all bits set to 1, or for buses terminated to all 1 when no device claims an access.
A: and B: were not specific to the type of drive. It was common to have two drives before fixed storage became common, often you would have the application disk in one and your data disk in the other though there were other common use patterns for two drives also (with the OS, or at least the core of it, resident in memory you can copy and otherwise manage data over two data disks, and so on).
The first hard-drive in a system was made C: to reserve A: and B: in part because there was software out there that assumed A: and B: were floppy drives and could cause problems if something else was allocated to those signifiers. There are many things that are due to long forgotten compatibility issues like this (try naming file LPT1 under Windows to see another). Another reason is that the BIOS on many PCs was just hard-wired to assume two floppy drives so DOS would see that even if there were no drives really there.
Even further back into time, before 3.5" disks, both A: and B: were 5.25" disks. And, although my memory is hazy, 3.5's were commonly slotted into B: at first, because no one had 3.5" boot disks until the drives became somewhat common.
I'm not much of an x86 person but on other architectures you can raise software interrupts/exceptions. Does x86 not have this or did those facilities not cover enough use cases?
Maybe because if the code wants to call the invalid opcode interrupt handler (INT6), it needs extra code to populate the flags and registers expected by that handler, whereas actually triggering an invalid opcode exception will get all those parameters populated automatically.
It's basically a convention. The alternative is to raise interrupts of course, but that might be application specific, or use other invalid instructions than the designated one, but they might work differently on other processor types.
What the instruction does is well documented, and the history of other invalid instructions being used for the same purpose in the past I'm guessing there is also well known, though a quick search doesn't turn up any official Intel documentation on the matter.
Given who this is and the overall quality of his output over the years, I'm willing to trust it isn't pure guesswork - and anyway, I'd trust his guesswork over many other people's absolute facts.
We also got UDB (D6), the one-byte variant that arrived with x86-64 for 64-bit mode.
And we have always had UDW (FF FF), aka group #5 (1st FF) with a modrm byte of mod=11b r/m=111b (/7) reg=111b (2nd FF) -- that one matters for memory with all bits set to 1, or for buses terminated to all 1 when no device claims an access.
The first hard-drive in a system was made C: to reserve A: and B: in part because there was software out there that assumed A: and B: were floppy drives and could cause problems if something else was allocated to those signifiers. There are many things that are due to long forgotten compatibility issues like this (try naming file LPT1 under Windows to see another). Another reason is that the BIOS on many PCs was just hard-wired to assume two floppy drives so DOS would see that even if there were no drives really there.
INT Ib INT1 INT3 INTO BOUND
Given who this is and the overall quality of his output over the years, I'm willing to trust it isn't pure guesswork - and anyway, I'd trust his guesswork over many other people's absolute facts.