I built one of these. It is not possible to do so for 60$ anymore since the board itself goes for 150+. On top of that you still need a PSU, NVMe, a high pressure fan, DP to HDMI adapter, possibly BT and Wifi adapters, and a 3d-printed or DIY case.
It is also a very hacky build. You need to flash the BIOS which enables a few interesting unlocks: from 24 to 40 GPU compute units and 6 to 8 CPU cores. It's a bit of a silicon lottery and will depend on your specific board and you need to test everything thoroughly yourself, honing on a config that works for you.
The software side of things is Linux, so if you're familiar with setting it up it shouldn't be difficult to go through the different steps. There are a few distros that work well. I use Bazzite and boot directly to Steam big picture, the UX is great. You can exit to desktop and you have a fully usable Linux box that you can play around with from the comfort of your sofa.
One of the downsides is that it uses a lot of power when idling, about 80W. I just turn it off after using it. I'm working on a QOL feature: an ESP32-based power switch that starts the board when a specific BT device is detected (usually a controller). Once everything is setup the board works very nicely. It can be a bit loud depending on your fan/case combination. I'm currently printing this one[0]
It delivers about the same punch as a standard PS5. The hardware is remarkably similar, and much better than mini PCs set up with AMD APUs, unless you go Strix halo but that is another price league (10x). You can play Cyberpunk 2077 decently on it on settings similar to an AMD RX 6700XT or slightly below RTX 3070.
A pretty impressive number is the memory bandwidth at ~410 GB/s, which should run local LLMs like Gemma 4 or Qwen3.8 27B at decent speed but with limited context size as its just 16Gb
Would I build it again? It was a lot of fun, but financially is not a crazy deal if you need to buy all the materials and factor your time in. Still much cheaper than a Steam Box!
Was it possible to build it for $60 when you built it though?
As for the idle dray, a lot of PC's have Wake On Lan so you can power it on via a special IP packet. I could't get it to work on mine, so i pus an esp32 based power monitoring plug in front of it, and configured the PC to power on directly when powered. When the power monitoring sees the PC sleeping for some time, it cuts the power. I control the plug via home assistant, so i can switch it on remotely
No. I bought it for about 150 shipping included from Canada to Spain. I reckon I spent about 300$ in total, the most expensive thing being the 1Tb NVMe.
I don't have an ethernet cable where the box is, so WoL is not an option for me either. I could have used something similar to your approach (very smart, by the way!) but decided to go ESP aiming for the most console-like experience of just grabbing the controller and playing your game
This isn't necessary related to this project but I got thinking about while reading it. Isn't it weird that shared memory was a cost saving measure by not having GPU dedicated has now been rechristened unified memory and is now a feature?
I understand why the AI people want it to help with the latency between the CPU and GPU. But having people in some cases use it as for marketing is kinda like getting watered down beer and getting told its a good thing because alcohol is bad for you.
You are _not_ getting one of these for less than $300, and because of this post and many like it, there are countless scams selling just cases for them at this price from a dollar or two of filament.
If it's advertised as a case and it works, why is it a scam? I don't own a 3D printer, nor do I know anyone who does. If someone is designing, printing, and selling a useful product, why is that a scam?
No graphics output. And so loud you wouldn’t be able to hear your game either. Also they use about 1kw of power, so you’d only want to run it in the winter.
It is also a very hacky build. You need to flash the BIOS which enables a few interesting unlocks: from 24 to 40 GPU compute units and 6 to 8 CPU cores. It's a bit of a silicon lottery and will depend on your specific board and you need to test everything thoroughly yourself, honing on a config that works for you.
The software side of things is Linux, so if you're familiar with setting it up it shouldn't be difficult to go through the different steps. There are a few distros that work well. I use Bazzite and boot directly to Steam big picture, the UX is great. You can exit to desktop and you have a fully usable Linux box that you can play around with from the comfort of your sofa.
One of the downsides is that it uses a lot of power when idling, about 80W. I just turn it off after using it. I'm working on a QOL feature: an ESP32-based power switch that starts the board when a specific BT device is detected (usually a controller). Once everything is setup the board works very nicely. It can be a bit loud depending on your fan/case combination. I'm currently printing this one[0]
It delivers about the same punch as a standard PS5. The hardware is remarkably similar, and much better than mini PCs set up with AMD APUs, unless you go Strix halo but that is another price league (10x). You can play Cyberpunk 2077 decently on it on settings similar to an AMD RX 6700XT or slightly below RTX 3070.
A pretty impressive number is the memory bandwidth at ~410 GB/s, which should run local LLMs like Gemma 4 or Qwen3.8 27B at decent speed but with limited context size as its just 16Gb
Would I build it again? It was a lot of fun, but financially is not a crazy deal if you need to buy all the materials and factor your time in. Still much cheaper than a Steam Box!
- [0] https://makerworld.com/en/models/3021754-bc250-case-mkuu-fsp...
Edit: GPU performance comparison
As for the idle dray, a lot of PC's have Wake On Lan so you can power it on via a special IP packet. I could't get it to work on mine, so i pus an esp32 based power monitoring plug in front of it, and configured the PC to power on directly when powered. When the power monitoring sees the PC sleeping for some time, it cuts the power. I control the plug via home assistant, so i can switch it on remotely
I don't have an ethernet cable where the box is, so WoL is not an option for me either. I could have used something similar to your approach (very smart, by the way!) but decided to go ESP aiming for the most console-like experience of just grabbing the controller and playing your game
I understand why the AI people want it to help with the latency between the CPU and GPU. But having people in some cases use it as for marketing is kinda like getting watered down beer and getting told its a good thing because alcohol is bad for you.
https://github.com/csabakecskemeti/amd_bc-250_how-to