>> “You keep holding on to hope, then breaking it, and moving forward by picking up ideas from the ashes,” [Baek] said in an interview with a web magazine published by Korean Institute for Advanced Study.
“I’m closer to a daydreamer by nature, and for me mathematical research is a repetition of dreaming and waking up.”
I love the kind of science reporting on display in this article! It stays at a consistent, objective level of detail throughout (no "imagine a vector space as a block of jello" or whatever it is that Quanta and other publications are always doing). It allows specialists to understand exactly what's being claimed, and at the same time stays accessible to laypeople. It feels like it's written for the kind of reader that I aspire to be: not necessarily a specialist on every topic under the sun, but someone who has finished high school and is paying attention.
Though I guess writing like this doesn't pay off in the modern world. Most readers don't consistently pay attention when reading, and to be honest, I don't either.
For many publications you could be critisizing, I'd agree with you, but Quanta usually reaches a higher standard that I feel they deserve credit for. Here's the Quanta article on the same thing [1]. It goes into much more detail, it shows a picture of the perfect sofa, and links to the actual research paper. They're aimed at a level above "finished high school", and I appreciate that; it gives me a chance to learn from the solution to a problem, and encourages me to think about it independently.
I agree with you that Quanta doesn't always "allow specialists to understand exactly what's being claimed", which is a problem; but linking to the research papers greatly mitigates that sin.
And here's how they clearly explain the proof strategy.
> First, he showed that for any sofa in his space, the output of Q would be at least as big as the sofa’s area. It essentially measured the area of a shape that contained the sofa. That meant that if Baek could find the maximum value of Q, it would give him a good upper bound on the area of the optimal sofa.
> This alone wasn’t enough to resolve the moving sofa problem. But Baek also defined Q so that for Gerver’s sofa, the function didn’t just give an upper bound. Its output was exactly equal to the sofa’s area. Baek therefore just had to prove that Q hit its maximum value when its input was Gerver’s sofa. That would mean that Gerver’s sofa had the biggest area of all the potential sofas, making it the solution to the moving sofa problem.
I agree that Quanta can be irritatingly stretchy with the metaphors sometimes, but to be fair, "What's the biggest couch you can fit through this hallway corner" is inherently easier to explain to laypeople than like, the Riemann Hypothesis.
i.e. if you apply the zeta function to a complex number, and you get zero, then that number must have been either a negative even integer or had a half as its real part.
What could be simpler than that? Those are all fairly simple concepts, and the definition of the function itself is nothing too exotic. I think any highschooler should be able to understand the statement and compute some values of zeta numerically. I'd like to see a statement about couches written so succinctly with only well-defined terms!
(I'm being intentionally a bit silly, but part of the magic of the Riemann Hypothesis is that it's relatively easy to understand its statement, it's the search for a proof that's astonishingly deep.)
That's a good point. I do remember doing problems related to extending formulae outside the radius of convergence in my final year before university, but I don't think it's fair to ask for proper complex analysis from 17-year-olds.
Agree, but I wanted more. What is the intuition behind the optimality proof? I realize you cannot summarize a 119-page paper in two paragraphs, but still.
For what it's worth, the article posted here is not from 2024, but from this week: "Published : Jan. 4, 2026", and contains original reporting (quotes from the researcher).
The mention of "Scientific American" in this article refers to something more recent:
> US magazine Scientific American named the research by Baek Jin-eon among its top 10 mathematical breakthroughs of 2025
November 2024 is when he posted the preprint on the arXiv: https://arxiv.org/abs/2411.19826 "Optimality of Gerver's Sofa" (submitted on 29 Nov 2024).
There has been other reporting since then, such as in Quanta Magazine: https://www.quantamagazine.org/the-largest-sofa-you-can-move... "The Largest Sofa You Can Move Around a Corner" (dated February 14, 2025). (Contains quotes from his adviser Michael Zieve, and from Gerver himself.)
The paper is still under review at the Annals of Mathematics, so there will be likely be another round of reporting when it has finished peer review and is published.
Not a problem, we can just shape it like the space covered by rotating the whole thing and make the sofa kind of "bone shaped", then we should be set for 3 dimensions. The only remaining issue would be, where to put the actual sitting area on the bone, but that problem I leave for homework.
3dimensions still allows for more freedom than that though since the couch can stand on end.
I would contend that it's still useful since you'd be able to turn the corner without over-complicating it by getting it into some weird tilt position.
> Not a problem, we can just shape it like the space covered by rotating the whole thing and make the sofa kind of "bone shaped", then we should be set for 3 dimensions.
That might give you a feasible solution, but I doubt it's optimal.
If you've ever moved any furniture at all, you'll notice that it's often much easier to get around corners (or through doorways), if you can turn them sideways.
That's especially easy to imagine with tables, but sofas also count.
There are also sofas that can be easily taken apart. Eg one of our sofas at home, an L-shaped sofa, comes apart into two pieces.
yep, I see those often here -- scary. Another sofa-related irony is that a lot of Koreans don't actually sit on their sofas. Rather, they sit on the (heated) floor and use the sofa as a back rest.
This is the famous sofa problem! It's hard to believe it's finally solved; I've spent many evenings staring at the wikipedia article wondering at how even what seem to be the simplest of problems defy the reach of mathematics.
> The so-called moving sofa problem asks how large a rigid shape can be while still being able to pass around a right-angled corner in an L-shaped corridor of a constant width of 1 meter.
This was also the problem in Dirk Gently’s Holistic Detective Agency, so fictionally this problem had already been solved.
There were at least 2 separate and independent TV series, but I highly recommend going to the original: the 2 later novels from Douglas Adams, after he wrote the Hitchhiker's Guide to the Galaxy.
In the novels, a stuck sofa is revealed to have got there because a retired Time Lord, Professor Urban Chronotis, briefly materialised his TARDIS in such a place it provided a doorway. So the books are extremely loosely tied into the Dr Who universe.
The DG novel was partly based on the Doctor Who story where there were six copies of the Mona Lisa, and the bad guy wanted to go back to primitive Earth before multicellular life.
"The atmosphere is poisonous. I'm not sure what's in it but it would certainly get your carpets nice and clean."
Looking at that graphic... it almost seems obvious. The outer corner radius would be relative to the inner curve radius in some fixed relationship, wouldn't it? The shallower the inner curve, the larger the outer curve has to be. A completely convex outside could have a flat inside. An inside that was concave from end to end could have a flat outside. Kudos to the guy for writing a proof! I wish this article explained better why it took 60 years to solve this...
The "obvious" solution that I think you're describing is the Hammersley sofa (1968), which has A=2.2074.
For a long time, it was thought this might be the optimal shape, but it was never proven. And it couldn't have been because it turns out that you can do better: the Gerver sofa (1992) is a more complicated shape, composed of 18 curve segments and has A=2.2195.
Nobody knew whether there might be an even better shape until now (assuming the proof holds up).
Here's a silly one: since 1, 3, 5 and 7 are primes, it almost seems obvious that all odd numbers are prime. Naturally, they are not, and there are countless proofs about various prime number generators to show that they can generate prime numbers, which are really prime.
I agree, modern definitions exclude 1 since "we lose" unique factorization. It's interesting to note [1] that this viewpoint solidified only in the last century.
No, 1 is excluded for reasons closely related to, but not conceptually identical with, the one you mention.
The "intuitive" argument that 1 is prime is that, as with prime numbers, you can't produce it by multiplying some other numbers. That's true!
But where the primes are numbers that are the product of just one factor, 1 is the product of zero factors, a very different status. The argument over whether 1 should be called a "prime number" is almost exactly analogous to the argument over whether 0 should be called a positive integer.†
It's more broadly analogous to the argument over whether 0 should be called a "number", but that argument was resolved differently. "Number" was redefined to include negatives, making 0 a more natural inclusion. If you similarly redefine "prime number" to include non-integral fractions (how?), it might make more sense to consider 1 to be one.
† Note that there is no Fundamental Theorem of Addition stating that the division of a sum into addends is unique. It isn't, but 0 is the empty sum anyway.
3 is also the product of the sets {3, 1}, {3, 1, 1}, etc.
We’re excluding the unit when defining these factor sets (ie, multiplicative identity) because it removes unique factorization.
That 1 is the unit is also why it’s the value for the product of the empty set because we want the product of a union of sets to match the product of a product of sets. But we don’t exclude it from the primes for that reason.
It's usually hard to explain why proving something is hard, because it's often just: existing/known/obvious approaches didn't succeed. Not terribly satisfying. Often you just have to try doing it and see, and even that won't be satisfying.
I think it depends on what you mean by "equivalent"
1. If the walls are vertical and you are maximizing the horizontal area of the sofa and you are not allowed to reorient the sofa, then the problem collapses to the 2D case and the solution is the same.
2. If you are allowed to reorient the sofa while moving it, and the sofa doesn't have a minimum height, and the ceiling is arbitrarily high, then the sofa can be arbitrarily large by angling it to an arbitrary degree and then setting it flat for measuring.
3. So the in between case is where the ceiling is of some limited height and/or the sofa is of some arbitrary height, and then you have to decide whether the sofa has to be an extrusion of a 2D shape, or if it can be an arbitrary shape, at which point you're maximizing volume rather than area. And for that the obvious lower bound is the 2D maximum shape * the ceiling height. But maybe there's better?
It seems pretty obvious that the 2D solution is still optimal in that case, by making the sofa maximally tall (1) at all points. Though I don’t know if it has been proven yet.
That does seem like a reasonable guess, yet it was only in 1992 that the current (now proven optimal) solution to the 2D case was proven so.
You could make the 3D case more interesting by having two corners: one in the plane and one out of the plane. It seems to me that that would need a new solution.
I have not read the sofa problem I am not qualified to even talk about it.
Given a rectangle tunnel, twist it so the walls become the ceiling, and also turn it in the same time. Seems like the same problem..
What is solved here is maximum shape, it feels like moving a object like this in 3D is basically a robot planning thing which in it self obviously magic for me. Finding a continuous path in a configuration space is the easy part, but then you have to understand how that changes when your shape changes.
My intuition says that with vertical walls, the problem collapses to 2d, but that 2d is a cross section of a 3d shape, and an infinite number of 3d shapes can hold that as the max cross section envelope.
Now I want a sofa of that shape to go with my ein-stein tiled floor and decorative Knuth’s dragon. I’ll add some nice art in a shape that can’t pass through itself as well.
This won't be popular [1], but research breakthroughs in theoretical mathematics seem to be often useless in a way that useless science is not. Scientific breakthroughs are also often useless (nothing practical is gained from the first detection of a gravitational wave, or from finding out how flight first evolved in insects) but scientific insights still have more information content: they tell us facts specifically about our world, while mathematical proofs merely tell us about all possible worlds. About some consequence of made-up assumptions we happen to find interesting.
It's a bit like finding the fastest way possible to beat Super Mario Bros 3 while collecting the minimum number of coins. A solution to a neat puzzle, but it doesn't carry the epistemic weight of finding out how the universe works, even if both pieces of knowledge are equally useless.
1: And of course this point doesn't apply to applied math.
dw, you're not alone in this. Researchers like this are extremely impressive, but it seems like an absolutely massive misallocation of his brainpower. Sure, people can say the same about art/literature/chess/etc., but I would argue that more people benefit from viewing or experiencing the latter than will benefit from working through all 119 pages of this paper. This guy could be doing medical or other scientific research, but instead is working on some contrived problem. Even here, let's assume there is some remote application for a nanobot for targeted drug delivery transiting a capillary... "rough" computational solutions will be more than adequate, especially when taking into account wall elasticity and other variables. I do wonder why some of the top institutions in the world like KIAS are even funding this.
I agree with you. I would rather this brain power go to modeling genetics, politics, and evolution. Fake problems like the sofa problem are overcelebrated while important issues like theory of eugenics are villified and undercelebrated.
There are like hundreds of unsolved mathematical problems in math on wikipedia page and I can't wait for llmslave2 to solve them all under 1 hour using only AI!!
“I’m closer to a daydreamer by nature, and for me mathematical research is a repetition of dreaming and waking up.”
beautiful!
Though I guess writing like this doesn't pay off in the modern world. Most readers don't consistently pay attention when reading, and to be honest, I don't either.
I agree with you that Quanta doesn't always "allow specialists to understand exactly what's being claimed", which is a problem; but linking to the research papers greatly mitigates that sin.
[1] https://www.quantamagazine.org/the-largest-sofa-you-can-move...
And here's how they clearly explain the proof strategy.
> First, he showed that for any sofa in his space, the output of Q would be at least as big as the sofa’s area. It essentially measured the area of a shape that contained the sofa. That meant that if Baek could find the maximum value of Q, it would give him a good upper bound on the area of the optimal sofa.
> This alone wasn’t enough to resolve the moving sofa problem. But Baek also defined Q so that for Gerver’s sofa, the function didn’t just give an upper bound. Its output was exactly equal to the sofa’s area. Baek therefore just had to prove that Q hit its maximum value when its input was Gerver’s sofa. That would mean that Gerver’s sofa had the biggest area of all the potential sofas, making it the solution to the moving sofa problem.
i.e. if you apply the zeta function to a complex number, and you get zero, then that number must have been either a negative even integer or had a half as its real part.
What could be simpler than that? Those are all fairly simple concepts, and the definition of the function itself is nothing too exotic. I think any highschooler should be able to understand the statement and compute some values of zeta numerically. I'd like to see a statement about couches written so succinctly with only well-defined terms!
(I'm being intentionally a bit silly, but part of the magic of the Riemann Hypothesis is that it's relatively easy to understand its statement, it's the search for a proof that's astonishingly deep.)
At risk of being tongue-in-cheek, a monad is just a monoid in the category of endofunctors, what's the problem?
As penance I did go an have a look for suitable numerical techniques for calculating zeta with Re(s)<1 and there are some, e.g. https://people.maths.bris.ac.uk/~fo19175/talks/slides/PGS_ta...
Edit: This article from September has a bit more: https://www.popsci.com/science/gervers-sofa-problem-solved/
So I don’t think this article can even qualify as a good example for explaining math problems to laymen.
Discussion on the paper (131 points, 2024, 36 comments) https://news.ycombinator.com/item?id=42300382
The mention of "Scientific American" in this article refers to something more recent:
> US magazine Scientific American named the research by Baek Jin-eon among its top 10 mathematical breakthroughs of 2025
This is a reference presumably to https://www.scientificamerican.com/article/the-top-10-math-d... "The 10 Biggest Math Breakthroughs of 2025" (dated December 19, 2025). It's more recent than your link https://www.scientificamerican.com/article/mathematicians-so... "Mathematicians Solve Infamous ‘Moving Sofa Problem’" (dated February 4, 2025).
November 2024 is when he posted the preprint on the arXiv: https://arxiv.org/abs/2411.19826 "Optimality of Gerver's Sofa" (submitted on 29 Nov 2024).
There has been other reporting since then, such as in Quanta Magazine: https://www.quantamagazine.org/the-largest-sofa-you-can-move... "The Largest Sofa You Can Move Around a Corner" (dated February 14, 2025). (Contains quotes from his adviser Michael Zieve, and from Gerver himself.)
The paper is still under review at the Annals of Mathematics, so there will be likely be another round of reporting when it has finished peer review and is published.
The problem asks for the largest 2D shape that can be slid around a right-angle corner in a unit-width hallway.
Here is the perfect fitting sofa: https://en.wikipedia.org/wiki/File:Gerver.svg
I would contend that it's still useful since you'd be able to turn the corner without over-complicating it by getting it into some weird tilt position.
That might give you a feasible solution, but I doubt it's optimal.
That's especially easy to imagine with tables, but sofas also count.
There are also sofas that can be easily taken apart. Eg one of our sofas at home, an L-shaped sofa, comes apart into two pieces.
https://centers.ibs.re.kr/html/living_en/housing/moving2.htm...
https://koreajoongangdaily.joins.com/news/2024-05-18/culture...
This was also the problem in Dirk Gently’s Holistic Detective Agency, so fictionally this problem had already been solved.
https://en.wikipedia.org/wiki/Dirk_Gently%27s_Holistic_Detec...
https://en.wikipedia.org/wiki/The_Long_Dark_Tea-Time_of_the_...
In the novels, a stuck sofa is revealed to have got there because a retired Time Lord, Professor Urban Chronotis, briefly materialised his TARDIS in such a place it provided a doorway. So the books are extremely loosely tied into the Dr Who universe.
Don't let this put you off.
"The atmosphere is poisonous. I'm not sure what's in it but it would certainly get your carpets nice and clean."
For a long time, it was thought this might be the optimal shape, but it was never proven. And it couldn't have been because it turns out that you can do better: the Gerver sofa (1992) is a more complicated shape, composed of 18 curve segments and has A=2.2195.
Nobody knew whether there might be an even better shape until now (assuming the proof holds up).
See: https://en.wikipedia.org/wiki/Moving_sofa_problem
https://en.wikipedia.org/wiki/File:Gerver%E2%80%99s_and_Hamm...
Here's a silly one: since 1, 3, 5 and 7 are primes, it almost seems obvious that all odd numbers are prime. Naturally, they are not, and there are countless proofs about various prime number generators to show that they can generate prime numbers, which are really prime.
[1] https://mathenchant.wordpress.com/2025/04/21/is-1-prime-and-...
The "intuitive" argument that 1 is prime is that, as with prime numbers, you can't produce it by multiplying some other numbers. That's true!
But where the primes are numbers that are the product of just one factor, 1 is the product of zero factors, a very different status. The argument over whether 1 should be called a "prime number" is almost exactly analogous to the argument over whether 0 should be called a positive integer.†
It's more broadly analogous to the argument over whether 0 should be called a "number", but that argument was resolved differently. "Number" was redefined to include negatives, making 0 a more natural inclusion. If you similarly redefine "prime number" to include non-integral fractions (how?), it might make more sense to consider 1 to be one.
† Note that there is no Fundamental Theorem of Addition stating that the division of a sum into addends is unique. It isn't, but 0 is the empty sum anyway.
This seems to be circular since it assumes that 1 is not prime
What do you mean?
The factors of 3 are 3 and 1. The factors of 1 are 1?
3 is the product of the members of {3}.
1 is the product of the members of the empty set.
Oh! So it’s like Python’s `reduce(multiply,s,initial=1)`, such that s={} still gets you 1. Alright, that makes sense.
We’re excluding the unit when defining these factor sets (ie, multiplicative identity) because it removes unique factorization.
That 1 is the unit is also why it’s the value for the product of the empty set because we want the product of a union of sets to match the product of a product of sets. But we don’t exclude it from the primes for that reason.
1. If the walls are vertical and you are maximizing the horizontal area of the sofa and you are not allowed to reorient the sofa, then the problem collapses to the 2D case and the solution is the same.
2. If you are allowed to reorient the sofa while moving it, and the sofa doesn't have a minimum height, and the ceiling is arbitrarily high, then the sofa can be arbitrarily large by angling it to an arbitrary degree and then setting it flat for measuring.
3. So the in between case is where the ceiling is of some limited height and/or the sofa is of some arbitrary height, and then you have to decide whether the sofa has to be an extrusion of a 2D shape, or if it can be an arbitrary shape, at which point you're maximizing volume rather than area. And for that the obvious lower bound is the 2D maximum shape * the ceiling height. But maybe there's better?
You could make the 3D case more interesting by having two corners: one in the plane and one out of the plane. It seems to me that that would need a new solution.
To make 3D relevant for a single turn, one of the hallways could be rotated 45° lengthwise.
Given a rectangle tunnel, twist it so the walls become the ceiling, and also turn it in the same time. Seems like the same problem..
What is solved here is maximum shape, it feels like moving a object like this in 3D is basically a robot planning thing which in it self obviously magic for me. Finding a continuous path in a configuration space is the easy part, but then you have to understand how that changes when your shape changes.
https://colab.research.google.com/github/google-deepmind/alp...
The volume has to be greater than 1 unit in order to be a solution so it could be harder in higher dimensions.
It's a bit like finding the fastest way possible to beat Super Mario Bros 3 while collecting the minimum number of coins. A solution to a neat puzzle, but it doesn't carry the epistemic weight of finding out how the universe works, even if both pieces of knowledge are equally useless.
1: And of course this point doesn't apply to applied math.
I presume HN textbox is too small.
I suspect you were being sarcastic.
Figuring out if that's the best you can get is another story.