It is obvious that energy to weight ratio is one of the most important characteristic of power banks. Reputable manufacturers will optimize for this, and if they are particularly good at it, they can ask for a premium.
If a generic powerbank beats the big names, sells for cheaper and is associated with a brand that has no reason to be associated with powerbanks, then it is very likely that the weight savings come from omitting something important rather than an optimized design. If the specs are true that is.
Probably, however, it makes me think of the Galaxy Note 7 problem. For those who don't remember, these phones had a battery problem that can cause them to catch fire, resulting in one of the most infamous smartphone recall campaign.
The cause of the problem is that the electrodes were pinched inside the pouch cell, in some cases causing a short circuit and a fire. To put it simply, it was too tight in there.
So here it is possible that these defects are a result of having too small safety margins for how these batteries are manufactured.
In addition, they only focused on the electrode alignment issue, because it is visible on their CT scans, they didn't study the electronics, the casing, the connectors, etc... There may be some other issues there.
I stick to Anker for cables, batteries and chargers. I'm sure they've had their own issues but everything I've bought feels well made. The only one I've had an issue with was a USB-C to everything else adaptor which weirdly stopped working after a week or two. I was surprised to find that their support was based in the UK (Cardiff if memory serves) and very efficiently processed a return and replacement.
I've watched Big Clive's videos for too long to trust no-name Chinese things with anything involving mains potential or energy storage.
No comment on Anker quality, but the "feels well made" feeling is something that has been known and gamed (for example, by including dummy weights in devices) in the hardware industry since forever. It is relatively unrelated to things you as a consumer may actually care about (like adherence to safety standards or amount of engineering effort put into the longevity of a product).
> No comment on Anker quality, but the "feels well made" feeling is something that has been known and gamed (for example, by including dummy weights in devices) in the hardware industry since forever.
Yup but for Anker devices you have a lot of nerds picking them apart on Youtube. If Anker were to engage in shady practices, the uproar and resulting shitstorm would be on a scale that could tank the entire company.
IMHO, Anker is one of the last remaining (funny, the company isn't that old) "brands" in the original sense.
That said, the last two Anker power pack models I've bought were both recalled for sometimes exploding/melting down in use. Once I'll give them, but twice? In a row?
You could also count recalls as a higher quality signal: QA, people testing, how they handle the recall & replacement, etc. Way better than not hearing anything because nobody's looking. I'm skeptical Anker is doing crazy-unique things with their manufacturing, vs. an OEM manufacturer cutting corners to save pennies.
A lot of big manufacturers have had recalls (for things like laptop batteries, vehicle batteries, the infamous Hoverboards, etc) so I wonder what Anker's batting average is compared to others. It's clearly a hard problem and squeezing in the level of density that customers expect means potentially thinner safety margins.
One of mine bought in 2017 was recalled and replaced, which impressed me: how many of the word salad brands of today would even be around to handle a recall if their devices decide to spontaneously combust?
I have an Anker powerbank. It will no longer charge using the USB-C port. I have an older Belkin that is certainly less stylish but has a higher capacity and still works perfectly, including charging via USB-C, so I'm not inclined to buy Anker again.
Of course neither of us has a lot of first hand data so it's hard to draw meaningful conclusions.
I'll be the voice of dissent here. I've heard nonstop praise for Anker online. Bought a couple keyboards and adapters from them and they all failed within a year. My wife got a mobile battery from them and that ended up dying in under a year as well. I'd be willing to write off one bad item, but I've had no good experiences and the pattern is clear to me.
Did you buy them off Amazon, or from a reputable reseller? I ask because Amazon mixes third party inventory together with first party inventory, so it's impossible to tell if you're getting a genuine product or a counterfeit.
>To avoid commingling, sellers have long had the option to apply a unique, seller-specific Amazon barcode — known as an FNSKU (Fulfillment Network Stock Keeping Unit) — to every product. This ensures their inventory is tracked and shipped separately.
... is that really all that was necessary all along? I can see that being a problem for, like, 10 cents worth of stuff, but a lot of the commingling complaints have been around expensive items. It's not zero cost of course, but for your average $30+ thing it doesn't seem very difficult to justify.
It may be their branding but anker has gained some trust despite some issues… I ordered a battery bank that was recalled, sent it back for a new one. Then a few months later the replacement battery bank was recalled which is not great. That being said I do trust they will recall a protect and notify me when there are issues with their products which is reassuring.
I call Anker the Oxo (kitchen gadget company) of the tech world. Does Oxo make the absolute best gadgets or tools? Nope. But they are among the best designed and made and typically the best bang for your buck hitting above its weight.
Anker is similar, it may not be the absolute best of the best but for the money you get solid design and build and rarely would you purchase something you need and be disappointed.
There's widespread issues with power banks in China, with a new CCC certification required, and recently something about upgraded enforcement because previously certified devices having been found to have issues.
I'd rather go with a brand that does proper costly recalls over one that just lets everybody keep the dangerous products around.
The difference here is that Anker will recall a faulty product. Lesser known brands will not. If you know of another brand that has a better safety and reliability record, please share.
I still have an old Anker 20,000 mAh power bank that works fine. Might not have the same charge ability as it once had but I can still get 2-3 charges out of it for a Pixel 8 Pro. Has 4 LED's to display charge level and a button that flashes them when you want to check status.
I bought a UGREEN bank on a recommendation and it was a buggy mess. It discharged more than it should when charging and when plugged in it rapidly charged to 100% which was sus. Graphical menu was weird and displayed ambiguous graphic messages to avoid text. These things feel like time bombs.
I have an older Anker power bank that would be considered giant by today's standards. I bought it for the specific feature of it having a 2.4mm power port that can be switched between 6v and 12v. It was one of the very few power banks that I've seen with this feature.
I also still have an old 20,000 mAh Anker power bank, and my only issue with it is that the micro-USB charging port is starting to wear out. For the rest, it's still brilliant, and it holds its charge very well while in storage.
I bought myself an anker powerbank because of all the rave around them. Mine behaves incredibly strange. Charged in seconds, then not containing half a phone charge.
For a 20.000 mAh this was really disappointing.
Probably a one of but still leaves the impression that this was looked at because it ruined the price for others.
Had a tangential issue with an Anker power bank (screen was sometimes showing bogus charge essentially), and can confirm Anker E-Mail support is pretty good in my experience, they sent me a second unit (even though the first is still functional and I still use it just fine to this day), free of charge after a brief exchange.
They also did a recall on speakers (under their soundcore subbrand) for the same thing. I'm not sure if this is good or bad - they proactively contacted me to let me know about the recall.
IKEA 45W and 65W Sjoss chargers and braided cables are also good. Pretty cheap too. There's also a 30W charger, but it has cheaper, presumably poorer quality components.
Those chargers have nice specs too. They support PD PPS (programmable power supply).
Yeah same. I’ve bought Anker power adapters, cables, power banks, headphones. All of them have done incredibly well. They’re not immune to issues, because sometimes their suppliers let them down. But if that happens they’ll replace your product for free.
I’ve seen airline training videos about in flight battery fires. But I’ve never considered the risk of ear buds catching on fire. Normally, you should feel them heating up before they catch but they might just blow, that would be very sore. Also if you’re sleeping with buds in you could end up with a fire before you woke up.
The more interesting thing is that they were actually pulled. Did the manufacturer send a recall notice? (And if so why didn't they send a statement). I can't imagine Amazon themselves taking any action since they allow other junk to stay up
FWIW, the Haribo charger seems to be rather well made: https://www.youtube.com/watch?v=xT_t5nvFcoY (26:50, by ZeroBrain, a German YouTuber that disassembles electronic devices)
I'd be interested to know if a headphone battery can suffer thermal runaway.
If the surface area to volume ratio is high enough, however badly it is made doesn't matter - it's not gonna catch fire anyway.
If that's the case, there is no safety issue with the headphones - a 0.5mm safety margin either end of a battery which is only 6mm long is insane anyway - and I don't fault the engineers for looking for other ways to get equivalent safety without compromising in capacity.
I would avoid anything exceed 100 watt-hours (which this does) as you can't fly with it. I do a lot of backocuntry bike trips so flying isn't the primary concern, but I'm not going to own multiples. Anker and other reputable brands tend to design around these type of use-cases which helps.
FWIW, I have one of the Haribo products, the 65W 3-port GaN charger. No battery to fail. I’ve run the charger standard enumeration test with a ct-3 and it supports everything except for VOOC. I’ve also load tested it with an adjustable usb load tester and it matches all the specs as advertised. It seems like they probably use the same controller as the Anker 3 port charger, but would need to see the teardowns. Otherwise, I’ll continue to recommend it.
Lumafield sells CT scanners, so these posts serve double duty as advertising for their capabilities. Given how many times their previous posts have been shared I'm sure the ROI is great.
It is just a generic battery you can buy e.g. in South Korea (for about $10 to $15) and some company got the license from Haribo to slap their branding on it through some crowdfunding project.
> How or why does a candy company decide to electronics? That's the mystery I need an answer to.
A few years ago, Haribo was in a serious crisis [1] - they didn't catch up on competition when it comes to new trends such as vegan candy, and a few years prior they had dismissed their marketing face Thomas Gottschank [2]. The closure of the Saxony plant also seriously soured relations with local politicians [3]. Some of all of that is attributed to the death of Hans Riegel in 2013 [4].
I don't have any particular insights into Haribo, but what I do know is that (especially struggling) brands tend to go towards making money off of the brand by licensing out rights... some of such deals tend to go well for everyone involved (see e.g. anything Lego touches), some run okay-ish (e.g. that's how you end with a "CAT" rugged phone made by Bullitt [5] - the things were rugged, but the performance was abysmal), and some end up in a massive clusterfuck like the Haribo batteries.
This reminds me of when pvs-studio would post every single analysis they would make of popular C++ projects. It was a fun novelty back in the day. Just like these scans, which now are boring and overplayed.
My indulgent aunt once let me get a five pound bag of them from one of those Scoop Your Own candy stations. I left them in the rear window of her VW Rabbit for the better part of a summer day and they melted into a horrible blob that scarred me for life. Not sure why this Gummi Bear post is giving me flashbacks to that.
But yes, those folks. Check the product shot in the article for their logo.
not sure what is more interesting, the detailed information on lithium battery construction, or how they got a CT(cat) scanner, or the idea of having an industrial
cat scanner around.
those batteries were bizarely cheap and there was prior suggestion that these(others) were
actualy fake with empty space or filler, which isn't the case, and all in all they just need to up the precision of there automated processes.
nice piece of journalism.
I think they are becoming a lot more prevalent in labs, these days. They aren't the monster devices that many of us may be (unfortunately) familiar with.
Has anyone reported issues with this battery, from what I've seen online everyone has been happy with its performance. Maybe the uneveness called out by the article is not enough to matter. Not following the industry standard is not necessarily the tipping point of everything going wrong.
"Well the batteries haven't caught on fire yet. I'm sure they're fine, despite the serious manufacturing defects that increase the risk of a fire substantially."
You realize they stopped selling them, right? They don't do this for "nothing to worry about."
No they are definitely not. You’re completely correct! They are, instead, an authority on what might get their asses sued to the moon and back and apparently found the cost/ benefit of selling this popular product to be negative. Any ideas what might cause that?
In the past, Amazon didn't care about dangerous products until lots of houses had been burned down by them, so if they ban a product it must be really bad.
> The article doesn't state by how much it increased.
This is a really strange response. How would you go about quantifying this when you don't care to add to their profit by buying a bunch of them, and can't get the product anyway because it was pulled for safety reasons?
That lower than .5 mm margin on those edges may not have caused fires - yet - but if nothing is done about it then one day they will. That's an accident waiting to happen.
It is obvious that energy to weight ratio is one of the most important characteristic of power banks. Reputable manufacturers will optimize for this, and if they are particularly good at it, they can ask for a premium.
If a generic powerbank beats the big names, sells for cheaper and is associated with a brand that has no reason to be associated with powerbanks, then it is very likely that the weight savings come from omitting something important rather than an optimized design. If the specs are true that is.
The cause of the problem is that the electrodes were pinched inside the pouch cell, in some cases causing a short circuit and a fire. To put it simply, it was too tight in there.
So here it is possible that these defects are a result of having too small safety margins for how these batteries are manufactured.
In addition, they only focused on the electrode alignment issue, because it is visible on their CT scans, they didn't study the electronics, the casing, the connectors, etc... There may be some other issues there.
I've watched Big Clive's videos for too long to trust no-name Chinese things with anything involving mains potential or energy storage.
No comment on Anker quality, but the "feels well made" feeling is something that has been known and gamed (for example, by including dummy weights in devices) in the hardware industry since forever. It is relatively unrelated to things you as a consumer may actually care about (like adherence to safety standards or amount of engineering effort put into the longevity of a product).
Yup but for Anker devices you have a lot of nerds picking them apart on Youtube. If Anker were to engage in shady practices, the uproar and resulting shitstorm would be on a scale that could tank the entire company.
IMHO, Anker is one of the last remaining (funny, the company isn't that old) "brands" in the original sense.
And like UGREEN, it was noticeably better than the other Chinese no-name brands.
Of course neither of us has a lot of first hand data so it's hard to draw meaningful conclusions.
https://www.geekwire.com/2025/after-years-of-backlash-amazon...
>To avoid commingling, sellers have long had the option to apply a unique, seller-specific Amazon barcode — known as an FNSKU (Fulfillment Network Stock Keeping Unit) — to every product. This ensures their inventory is tracked and shipped separately.
... is that really all that was necessary all along? I can see that being a problem for, like, 10 cents worth of stuff, but a lot of the commingling complaints have been around expensive items. It's not zero cost of course, but for your average $30+ thing it doesn't seem very difficult to justify.
The two are not mutually exclusive. Unless they become a pattern.
I'd rather go with a brand that does proper costly recalls over one that just lets everybody keep the dangerous products around.
I bought a UGREEN bank on a recommendation and it was a buggy mess. It discharged more than it should when charging and when plugged in it rapidly charged to 100% which was sus. Graphical menu was weird and displayed ambiguous graphic messages to avoid text. These things feel like time bombs.
Might be worth a shot.
Those chargers have nice specs too. They support PD PPS (programmable power supply).
If the surface area to volume ratio is high enough, however badly it is made doesn't matter - it's not gonna catch fire anyway.
If that's the case, there is no safety issue with the headphones - a 0.5mm safety margin either end of a battery which is only 6mm long is insane anyway - and I don't fault the engineers for looking for other ways to get equivalent safety without compromising in capacity.
A few years ago, Haribo was in a serious crisis [1] - they didn't catch up on competition when it comes to new trends such as vegan candy, and a few years prior they had dismissed their marketing face Thomas Gottschank [2]. The closure of the Saxony plant also seriously soured relations with local politicians [3]. Some of all of that is attributed to the death of Hans Riegel in 2013 [4].
I don't have any particular insights into Haribo, but what I do know is that (especially struggling) brands tend to go towards making money off of the brand by licensing out rights... some of such deals tend to go well for everyone involved (see e.g. anything Lego touches), some run okay-ish (e.g. that's how you end with a "CAT" rugged phone made by Bullitt [5] - the things were rugged, but the performance was abysmal), and some end up in a massive clusterfuck like the Haribo batteries.
[1] https://taz.de/Haribo-Werk-im-Osten-vor-Aus/!5755771/
[2] https://www.spiegel.de/panorama/leute/thomas-gottschalk-tren...
[3] https://www.rnd.de/promis/werksschliessung-in-sachsen-thomas...
[4] https://www.spiegel.de/wirtschaft/unternehmen/haribo-chef-ha...
[5] https://www.heise.de/news/Outdoor-Smartphones-Bullitt-Group-...
But yes, those folks. Check the product shot in the article for their logo.
Lumafield is a CT company: https://www.lumafield.com/
I think they are becoming a lot more prevalent in labs, these days. They aren't the monster devices that many of us may be (unfortunately) familiar with.
You realize they stopped selling them, right? They don't do this for "nothing to worry about."
The article doesn't state by how much it increased.
>You realize they stopped selling them, right?
I don't think Amazon is an authority on battery safety and are airing on the side of safety than making an actual judgements on the safety of it.
This is a really strange response. How would you go about quantifying this when you don't care to add to their profit by buying a bunch of them, and can't get the product anyway because it was pulled for safety reasons?