Most of the affordable CO2 meters are relative, not absolute. They set their 400 PPM level based on the lowest value they ever see. That's usually OK, but it's not good enough for places with permanent people occupancy, such as nursing homes.
Absolute detectors with NIST calibration are available but around US$500.[1]
Cool project. I've done something similar using defunct crypto Awair AQI sensors tied into Home Assistant. They have an LED panel in the front that can show overall AQI or any of the pollutants they track:
https://www.getawair.com/products/element
The sky is the limit as to what you can do with Home Assistant automations.
It's surprising how quickly a room with a closed door and one person can go from ~ambient CO2 levels to 1000ppm+.
were you able to repurpose your Awair device? Mine has sat bricked since they discontinued supporting it. I'd love to use it for anything if you're able to point to any docs on how to make it useful again?
> The air gets "stale": humidity often rises above 60 %,
Fun - I have the opposite problem, humidity goes down to almost nothing and we have to use humidifiers to keep it around 40% to avoid horrible nose/throat/skin dryness.
You should find a friend's garage, shop or hackerspace with a brake, and metal cutting tools.
I have a similar monitor for equipment metrics, and the cardboard design is similar to the stand I made out of metal. I powder coated the metal light beige and it looks professional.
This is cool! How does it compare to e.g. an Aranet4? I got one to detect when there is a high risk of COVID-19 aerosols lingering and generally carry it in my bag. That way I can check the reading using my phone.
The Aranet4 is also interesting to carry on a flight, it logs the Co2, pressure, and temperature. I can see my arrival/departure on trips by looking for the pressure drops in the graphs.
Most of the affordable CO2 meters are relative, not absolute. They set their 400 PPM level based on the lowest value they ever see. That's usually OK, but it's not good enough for places with permanent people occupancy, such as nursing homes. Absolute detectors with NIST calibration are available but around US$500.[1]
[1] https://www.forensicsdetectors.com/products/carbon-dioxide-d...
The sky is the limit as to what you can do with Home Assistant automations.
It's surprising how quickly a room with a closed door and one person can go from ~ambient CO2 levels to 1000ppm+.
Wouldn't it be easier to just turn on the air conditioner?
Fun - I have the opposite problem, humidity goes down to almost nothing and we have to use humidifiers to keep it around 40% to avoid horrible nose/throat/skin dryness.
Forced air hvac is probably why.
I have a similar monitor for equipment metrics, and the cardboard design is similar to the stand I made out of metal. I powder coated the metal light beige and it looks professional.